Novameta Table with Cutting Board Recess 800-6

A stainless steel worktop with a recessed area sized for standard plastic cutting boards holds the board steady while the operator chops, slices or dices. The board sits flush with the surrounding surface so food slides across without catching, and the table itself stays level under the pressure of a knife blade.

The table stands on a welded frame of stainless steel tubes. Adjustable feet at each corner let the operator set the worktop to the exact height of adjacent equipment, eliminating a step that would otherwise tilt the board and send liquids or small items rolling off. The feet also absorb minor unevenness in the floor, keeping the surface stable during use.

To prepare the table, the operator selects a plastic cutting board of the correct width—either 300 mm or 400 mm—and thickness—20 mm or 30 mm—and lowers it into the recess. The board locks into place without clamps, held by its own weight and the close fit of the recess. Once the board is in position, the operator can begin work directly on it, using the surrounding stainless steel surface for temporary storage of ingredients or tools. The welded construction of the frame and legs ensures that the table does not flex or wobble, even when the operator applies force to the board.

The frame is built from stainless steel tubes in two sizes: 40 × 40 mm for the legs and 40 × 20 mm or 25 × 25 mm for the cross-bracing. The legs and frame are welded together, forming a single rigid structure that resists twisting or bending. Adjustable feet thread into the bottom of each leg, allowing height correction up to 65 mm above or below the nominal setting. The worktop itself is a reinforced stainless steel sheet, designed to support the weight of the operator and equipment without sagging.

An 800 mm length provides space for a full-size cutting board and additional work surface on either side, while a 600 mm depth keeps the operator within easy reach of everything on the table. The 900 mm overall height places the worktop at a comfortable working level for most kitchen staff, reducing strain during prolonged use. The adjustable feet allow fine-tuning to match the height of adjacent workstations, ensuring a continuous work surface.

Cleaning is straightforward: the operator removes the plastic cutting board and washes it separately. The stainless steel worktop and frame can be wiped down with a damp cloth and standard kitchen sanitiser. The welded construction leaves no crevices where food debris can accumulate, and the adjustable feet can be removed for thorough cleaning of the underside if needed. The table is designed for use with plastic cutting boards only; wooden or composite boards are not compatible with the recess dimensions.

The table is available with a recess sized for either 300 mm or 400 mm wide plastic cutting boards, and the boards themselves are offered in 20 mm or 30 mm thicknesses as optional extras. The table is classified as a preparation surface in the Novameta catalogue.