Novameta Table with Cutting Board Recess MP1-WRX-110/60/90

A stainless steel worktop with a recessed channel sized for standard plastic cutting boards gives a stable, hygienic surface for chopping, portioning and prep work in professional kitchens. The channel keeps the board from sliding while the operator works, and the raised edges around it contain juices and scraps that would otherwise run onto the floor or the surrounding work surface. The table stands on a welded stainless steel frame of square and rectangular tubing. Four adjustable feet at the corners allow the unit to be levelled on uneven floors, compensating for small slopes without shimming. The feet are threaded into the legs and can be raised or lowered through a range of 65 mm, giving enough adjustment to keep the worktop steady and the load evenly distributed across all four legs. To use the table, the operator places a plastic cutting board of 300 mm or 400 mm width into the recessed channel. The channel is sized to accept boards up to 30 mm thick, so both 20 mm and 30 mm boards sit flush with the surrounding worktop. Once the board is in place, the operator can chop, slice or portion directly on it without the board shifting. When the task is finished, the board is lifted out for cleaning, leaving the stainless steel surface ready for the next job. The worktop and frame are constructed entirely of stainless steel. The legs are 40×40 mm square tubing, and the cross-bracing and supports are 40×20 mm and 25×25 mm tubing. The feet are stainless steel with a threaded stem that screws into the legs. No wood, plastic or other materials are used in the frame or worktop, so the unit can be cleaned with hot water and sanitiser without risk of warping or corrosion. The table measures 1100 mm long, 600 mm deep and 900 mm high. The 1100 mm length provides a generous work surface for multiple tasks or for two operators working side by side. The 600 mm depth keeps everything within easy reach without overhanging into walkways. The 900 mm height matches standard worktop heights in professional kitchens, so it aligns with hobs, sinks and other equipment for a continuous work line. Cleaning is straightforward: the plastic cutting board is removed and washed separately, while the stainless steel worktop and frame can be wiped down with a cloth and sanitiser. The adjustable feet should be checked periodically to ensure they are tight and the table remains level. The seamless welded top lets you wipe the entire surface without removing any parts after each shift. The table is available with a choice of cutting-board thickness: the channel can be sized for 20 mm or 30 mm boards, but the boards themselves are not included with the table.