Novameta Triple Wall Shelf for Professional Kitchens, 1200 x 400 x 999 mm

A triple-tier wall shelf from Novameta organises kitchen essentials within arm's reach while keeping the worktop clear. Each shelf provides a flat, stable surface for ingredients, utensils or small appliances, mounted directly to the wall so the floor stays free for cleaning and movement. Wall shelves of this type rely on sturdy brackets and fixings to transfer the weight of stored items to the building structure. The shelves themselves are rigid panels that resist sagging under load, allowing even distribution of weight across the full width. Because the shelves are open, air circulates freely, reducing condensation and making it easier to spot and remove spills. To install, mark the fixing points on the wall, drill and insert suitable anchors, then attach the brackets. The shelves slide onto the brackets and are secured with screws or clips. Once mounted, the operator loads each shelf from the front, placing heavier items on the lower tiers and lighter ones above. The 40 kg load rating per shelf means it can hold bulk containers, stacked plates or small countertop equipment without risk of deformation. The unit is constructed from stainless steel, chosen for its resistance to corrosion, heat and frequent cleaning. The 1200 mm length spans a typical work zone, while the 400 mm depth keeps items within easy reach without overhanging the worktop below. At 999 mm high, the top shelf sits just below eye level for most users, reducing the need to stretch or bend. No controls are fitted; the shelf is a static storage unit. The 1200 mm width allows it to bridge standard wall stud spacing, simplifying installation. The 40 kg load capacity per shelf dictates the type of items it can safely hold, while the 999 mm height determines how many shelves can be stacked before reaching the ceiling or interfering with overhead lighting. The sealed powder-coated surface lets you wipe away splashes of oil or sauce without trapping moisture that could corrode the steel underneath. Because the shelves are open and uncoated, there are no hidden crevices where dirt can accumulate. The stainless steel surface can be sanitised with standard kitchen disinfectants without risk of damage or discolouration. This model is a single variant with no additional options or configurations. It is designed as a fixed storage solution and does not fit or replace parts from other manufacturers. Catalogue placement: commercial kitchen storage and organisation equipment, wall-mounted shelving systems.