Novameta Universal Stand for Equipment 800-7 OX0-PL1-80/70/50

A freestanding support platform that raises catering appliances to a comfortable working height while keeping them stable on uneven floors. The stand does not supply power or plumbing; it simply holds the appliance above the floor, allowing operators to load, unload and clean beneath it without bending or lifting.

The frame is a welded rectangle of stainless steel tubing that carries the weight of the appliance directly to the floor. Four adjustable feet at the corners compensate for sloping floors, preventing the stand from rocking and keeping the appliance level. Anti-slip corner pads grip the underside of the appliance, stopping it from sliding when the stand is moved or when the appliance is loaded.

To use the stand, place it on the chosen spot and extend or retract each foot until the frame is level. Slide the appliance onto the platform, aligning its corners with the anti-slip pads. Check that the appliance is stable before loading it. The stand remains in place while the appliance is in use; it is moved only when the appliance is empty and switched off.

The frame is constructed from 40×40 mm stainless steel tube, welded at every joint for rigidity. The feet are stainless steel with a threaded rod that allows 65 mm of vertical adjustment. Four heavy-duty feet with 40 mm adjustment are also supplied, giving a choice of two levelling ranges. Anti-slip corners are 100×100 mm pads that sit on the top of the frame.

The 800 mm width and 700 mm depth create a footprint that matches most countertop appliances, while the 500 mm height brings the appliance to a standard worktop level. A maximum load of 120 kg per shelf allows the stand to support heavy-duty mixers, slicers or heated holding cabinets without deformation.

Cleaning is limited to wiping the stainless steel surfaces with a damp cloth; no disassembly is required. The welded frame has no crevices where food debris can collect, and the feet can be removed for thorough cleaning if necessary.

The stand is supplied as a single unit, ready to accept any appliance whose base fits the 800×700 mm platform and whose weight does not exceed 120 kg when evenly distributed.

In the Novameta catalogue the stand is listed under Workplace Organisation, Equipment Support.