Novameta Wall Cabinet with Hinged Doors for Professional Kitchens, 900 x 300 x 600 mm

A wall-mounted storage cabinet keeps worktops clear and ingredients or utensils within reach without occupying floor space. The unit is fixed to the wall at a comfortable working height, leaving the area beneath free for trolleys, bins or foot traffic. Two hinged doors swing open to reveal the full width of the interior, allowing quick access to stored items while shielding them from kitchen splashes and airborne contaminants when closed.

The cabinet is loaded by placing items on the internal shelf or directly on the base. The shelf divides the space into two levels, so smaller or lighter goods can be stacked above heavier ones. Doors are closed by pulling them gently until the magnetic or mechanical catch engages, securing the contents and maintaining a tidy appearance. When the cabinet is no longer needed, it remains in place, ready for the next service.

Construction is entirely in stainless steel, chosen for its resistance to moisture, cleaning chemicals and repeated impact. The material does not absorb odours, stain or corrode, so the cabinet retains its appearance and hygiene properties over years of daily use. The 900 mm width spans a standard worktop module, while the 300 mm depth keeps the unit within the footprint of most wall-mounted hobs and sinks. A height of 600 mm places the shelf at eye level for most operators, reducing the need to bend or stretch.

Two doors are fitted, each hinged on the outer edge. The doors meet in the centre, forming a continuous seal that protects the contents from dust and grease. No controls are required; the doors are opened and closed manually.

The stainless steel finish is easy to wipe down with a damp cloth and commercial detergent. The smooth surfaces and rounded corners prevent dirt from accumulating, so routine cleaning takes only a few minutes. The internal shelf can be removed for thorough washing if required, and the hinges should be checked periodically for smooth operation and lubricated if necessary.

The same cabinet is available in other widths, depths and heights to suit different kitchen layouts. Custom dimensions can be produced to match specific project requirements.