Novameta Wall Cabinet with Hinged Doors for Professional Kitchens, 1100 x 400 x 600 mm

The stainless steel doors swing smoothly out of the way so chefs can reach pans, trays or ingredients without stepping back from the counter. The unit is fixed to the wall at a convenient height, leaving the area below free for trolleys or cleaning. Two hinged doors open to reveal a single shelf, allowing items to be grouped by use or frequency of access. The cabinet is built entirely of stainless steel, a material chosen for its resistance to moisture, grease and frequent wiping. The surface does not corrode, chip or absorb odours, so it meets the hygiene standards of commercial kitchens, food-processing plants and catering operations. The steel is formed into a rigid box that resists sagging under the weight of stacked dishes or heavy equipment. To use the cabinet, the operator opens one or both doors, places items on the shelf or directly on the base, then closes the doors to protect the contents from dust and splashes. The doors swing on hinges that are sealed to prevent dirt accumulating in the mechanism. No electrical supply or moving parts are involved, so the unit remains ready for use at all times. Construction is a single welded frame of stainless steel with a brushed finish. The doors are also stainless steel, mounted on concealed hinges that allow a full swing without protruding into the workspace. A single shelf spans the interior, supported by brackets that are fixed to the side walls. The controls are limited to the door handles, which allow the doors to be opened and closed. No settings or adjustments are required. The dimensions of 1100 mm wide, 400 mm deep and 600 mm high create a footprint that fits above most worktops and below standard overhead shelves. The 1100 mm width allows the cabinet to be centred on a wall section without overhanging adjacent units. The 400 mm depth keeps the contents within easy reach without encroaching on the aisle. The 600 mm height provides sufficient vertical space for stacked trays or tall containers while remaining low enough to be mounted at eye level. Cleaning is limited to wiping the interior and exterior surfaces with a damp cloth and a mild detergent. The stainless steel finish does not require polishing or protective coatings. The hinges and handles should be checked periodically for tightness and free movement, but no lubrication is needed. Other sizes are available to match different wall spaces and storage requirements. Custom dimensions can be produced to individual specifications.