Novameta Wall-Mounted Catering Table with Reinforced Shelf, 2700 x 600 x 750 mm

A wall-mounted catering table frees floor space while providing a sturdy work surface for food preparation, plating or holding equipment. The unit bolts directly to the wall structure, transferring the load through the frame rather than resting on legs. This method eliminates wobble and allows the full depth of the tabletop to be used without obstruction, making it easier to slide heavy trays or bulk ingredients across the surface.

The tabletop is a pressed sandwich panel that combines rigidity with quiet operation. The core dampens vibration, so chopping, slicing or mixing does not travel through the metal and disturb nearby staff. A welded stainless steel tube frame runs beneath, shaped to support the full width without sagging. The frame's 25 mm tubing is available in varying wall thicknesses to match the expected load, ensuring the table remains level under the weight of appliances, bulk ingredients or stacked dishes.

To use the table, the operator first secures the mounting brackets to the wall at the specified height. Once the frame is level and bolted in place, the tabletop is lowered onto the frame and fixed with screws. The reinforced shelf, if fitted, is then attached beneath the tabletop, providing additional storage or a secondary work surface. The upstand, where included, clips along the rear edge to contain spills and prevent items from sliding off the back.

Construction is entirely in stainless steel, with the frame welded for strength and the tabletop pressed for a smooth, seamless finish. The frame's tubing measures 25 mm in diameter, with wall thickness adjusted between 25 and 50 mm to suit the load requirement. The tabletop's maximum uniform load is 120 kg, allowing it to hold bulk ingredients, heavy appliances or multiple trays without flexing.

The table is available in two widths: 650 mm with a 3% tolerance, or 700 mm with a 5% tolerance. Overall dimensions are 2700 mm long, 600 mm deep and 750 mm high, providing a continuous work surface that can be positioned above under-counter storage or alongside other wall-mounted units.

Cleaning is straightforward: the pressed sandwich tabletop can be wiped down with a damp cloth and mild detergent, while the welded frame and tubing are rinsed with water to remove grease or debris. The absence of legs or cross-bracing beneath the tabletop ensures no dirt traps are created, keeping the area hygienic and easy to maintain.

The product is listed in the Novameta catalogue under mounted tables, suitable for professional kitchens requiring wall-fixed work surfaces with high load capacity.