Novameta Wall-Mounted Height-Adjustable Worktable 2200 BHS-XRV-220/60/76

A wall-mounted worktable that moves up and down keeps the same worktop at the right height for every task without taking floor space. The table is fixed to the wall with brackets and a vertical track; a gas spring or electric actuator raises or lowers the top while the legs stay off the floor. This design leaves the area underneath free for trolleys, cupboards or cleaning, and the table can be pushed up against the wall when not in use.

The operator unlocks the mechanism, lifts or lowers the top to the desired height, then locks it again. No tools are needed, and the adjustment is smooth enough to do with one hand while the other holds a tray or a pan. Once set, the table stays at that height until the next change.

The worktop is stainless steel, mounted on a frame of the same material. The wall brackets and track are also stainless steel, standardised for commercial kitchens. The table is 2200 mm long, 600 mm deep and 760 mm high at its lowest setting, giving a large continuous surface for prep, plating or holding.

Height adjustment lets the same table serve a chef standing at full height, a seated worker or a child helping in a school kitchen. The wall mounting means the unit does not wobble, even when the top is fully extended, and the space underneath stays clear for other equipment or for mopping.

Cleaning is limited to wiping the stainless steel surfaces with a damp cloth and a mild detergent. The wall track and brackets should be checked periodically for loose fixings, but no lubrication or special maintenance is required.

The table is supplied in two worktop widths: 650 mm and 700 mm, each with its own tolerance for manufacturing variation.