Novameta Wall-Mounted Height-Adjustable Worktop BHS-XRV-170/60/76

A wall-mounted worktop that adjusts in height gives a professional kitchen a stable surface at the exact level the task demands. The unit fixes to the wall with brackets, removing the need for legs and freeing the floor underneath for cleaning or storage. Adjustment is mechanical, so no power supply is required, and the chosen height stays locked until the operator releases it again.

The principle is a pair of vertical rails bolted to the wall. A sliding carriage runs on each rail, and the worktop spans between the two carriages. When the operator turns the adjustment handle, a threaded rod inside each rail turns with it, lifting or lowering the carriage. The threads are self-locking, so the worktop stays at the set height without continuous pressure on the handle. The system is simple, needs no maintenance beyond occasional lubrication, and allows fine control over the working height.

To use the table, the operator first checks that the wall fixings are secure and that the floor area beneath is clear. The worktop is raised or lowered by turning the adjustment handle until the desired height is reached. Once set, the worktop provides a level surface for food preparation, plating, or holding equipment. When not in use, the table can be left at its working height or lowered to save space.

Construction is stainless steel throughout, chosen for its resistance to corrosion and ease of cleaning in a kitchen environment. The worktop surface is a single sheet, seamless and without joints, which prevents dirt from collecting. The underside of the worktop is reinforced to carry the weight of equipment placed on it. The adjustment mechanism is enclosed within the vertical rails, protecting it from splashes and impact.

The adjustment handle is the only control, and it sets the height of the worktop. There are no electrical or electronic components, so the table is unaffected by power cuts or voltage fluctuations.

The size of 1700 mm by 600 mm gives a generous working area while keeping the unit narrow enough to fit along a wall in a busy kitchen. The height of 760 mm is the standard working level for many tasks, and the adjustment range allows it to be raised or lowered to suit the operator or the job. The weight of the unit is carried by the wall fixings, so the strength of the wall and the quality of the fixings are critical to safe use.

Cleaning is straightforward: the stainless steel surface is wiped down with a damp cloth and a mild detergent. The adjustment mechanism requires occasional lubrication to keep it smooth, but no disassembly is needed. The absence of legs and the seamless construction mean there are no crevices where dirt can accumulate.

The table is available in two worktop depths: 650 mm and 700 mm, each with a stated tolerance for manufacturing variation.

This worktop is listed in the catalogue under mounted preparation surfaces for professional catering equipment.