Novameta Wall-Mounted Height-Adjustable Worktop BHS-XRV-80/60/76

A wall-mounted worktop that moves up and down to suit the task or the user, eliminating the need to bend or reach across fixed counters.

The table is fixed to the wall with a sturdy bracket system. A gas spring or electric actuator inside the bracket counterbalances the weight of the top and any load placed on it. The operator unlocks the mechanism with a foot pedal or a handle, then lifts or lowers the top to the desired height. Once released, the mechanism locks automatically, holding the worktop securely in place without further support.

To use the table, the operator first checks that the area beneath is clear. The locking handle or pedal is pressed to release the mechanism. The top is then raised or lowered by hand until the required working height is reached. The handle or pedal is released, engaging the lock. Ingredients, utensils or small appliances can now be placed on the surface. When the task is complete, the load is removed, the mechanism unlocked again, and the top returned to its storage position against the wall.

The worktop is constructed from stainless steel, chosen for its resistance to corrosion, heat and frequent cleaning. The underside of the top and the supporting bracket are also stainless steel. The mounting bracket is designed to be fixed to a solid wall with suitable fixings, which are not supplied with the table.

Height adjustment is controlled by a single locking handle or foot pedal, depending on the variant. The handle or pedal releases the locking mechanism, allowing the top to move freely until the lock re-engages.

The 800 mm width provides a generous work surface for food preparation, plating or holding small appliances. The 600 mm depth allows the table to be positioned close to the wall without protruding excessively into the kitchen aisle. The 760 mm maximum height is measured from the floor to the top of the work surface when fully raised. The adjustable range is determined by the mounting height of the bracket and the length of the gas spring or actuator, which are set at installation.

Cleaning is straightforward: the stainless steel top is wiped down with a damp cloth and a mild detergent after each use. The mechanism should be kept free of food debris and grease to ensure smooth operation. The mounting bracket and fixings should be checked periodically for tightness and signs of corrosion.

The table is available in two variants: one with a foot pedal release and one with a side-mounted locking handle. Both variants share the same dimensions and construction.