Novameta Wall-Mounted Table 2.9 Metres for Professional Kitchens

A wall-mounted worktable frees floor space in a busy kitchen by carrying its load on brackets fixed to the wall. The frame transfers the weight of food, utensils and equipment directly to the building structure, so the tabletop stays level without legs that would block cleaning underneath. This arrangement also lets staff sweep or mop the entire area without moving the unit, cutting the time spent on hygiene routines.

The tabletop is a pressed sandwich panel that resists dents and absorbs the clatter of pots and trays. Its smooth surface spreads the load evenly, so a full tray or a heavy mixer does not cause sagging. A welded stainless-steel frame runs along the front and sides, giving the unit its rigidity and providing a lip to stop items sliding off. The frame is made from square-section tube, which combines strength with a clean line that is easy to wipe down.

To install the table, brackets are first fixed to the wall at the required height. The table is then lifted onto the brackets and secured. Once in place, the operator loads the worktop with ingredients, tools or small appliances up to the stated capacity. The uniform load limit means the table will support a full tray of dishes or a heavy mixer without risk of tipping or bending. If an upstand is fitted, it forms a rear barrier that keeps items from falling off the back and collects spills, making them easier to wipe up.

The tabletop is available in two widths: 650 mm or 700 mm. Both are 2900 mm long and 750 mm high, giving a continuous work surface that can be organised for prep, plating or holding. The stainless-steel frame and pressed sandwich construction mean the unit will not rust, warp or absorb odours, and the smooth surfaces allow quick cleaning with a cloth and sanitiser. Regular wiping removes food debris and grease, while the open underside lets water drain away without pooling.

The welded frame and pressed sandwich top are designed for daily use in a professional kitchen, where the table will carry heavy loads without noise or flex. The wall-mounted design keeps the floor clear, speeds up cleaning and provides a stable work surface that stays level under load.