Novameta Wall-Mounted Worktable with Reinforced Shelf

A wall-mounted stainless steel worktable frees floor space while providing a sturdy work surface for food preparation, plating and assembly. The unit bolts directly to the wall structure, transferring the load through the welded frame rather than resting on legs. This construction eliminates wobble and vibration, even when heavy containers are moved across the top. A reinforced shelf beneath the tabletop doubles storage without adding a separate cupboard, keeping ingredients and tools within arm's reach of the chef. The tabletop is formed as a pressed sandwich panel, combining a rigid core with smooth stainless steel faces. This method yields a surface that is both strong and quiet: pans slide easily, and dropped utensils do not clang. The welded frame of 25 mm stainless steel tube distributes the weight evenly, so the 120 kg maximum load can be spread across the entire length without sagging. An optional upstand along the back edge stops liquids and small items from rolling off during busy service. To install, the unit is positioned against the wall at the desired height, secured with through-bolts into the wall structure, and levelled. The operator then loads the tabletop with equipment or ingredients up to the 120 kg limit, ensuring the weight is evenly distributed. The shelf below is used for storage of lighter items that need to be kept close at hand. Cleaning is straightforward: the smooth stainless steel surfaces are wiped down with a damp cloth and sanitiser, while the welded frame and pressed sandwich construction prevent dirt traps. The 1900 mm length provides ample linear workspace for multiple chefs or large trays, while the 600 mm depth allows comfortable reach across the entire surface. The 750 mm height is standardised for standing work, matching the height of most hobs, sinks and other worktops in professional kitchens. The unit is available in two widths: 650 mm as standard, or 700 mm for additional workspace where wall length permits. Cleaning and maintenance follow directly from the materials: stainless steel resists corrosion and staining, so daily wiping with a mild detergent is sufficient. The welded joints and pressed sandwich construction eliminate crevices where food debris could collect, reducing the risk of cross-contamination. The seamless pressed sandwich top and welded stainless-steel frame let you wipe down the entire surface and underside without removing a single screw. The Novameta BHS-HLX-190/60/75 is classified in the catalogue under mounted preparation tables, offering a space-saving alternative to freestanding units.