Novameta Wall-Mounted Worktable with Reinforced Shelf 1400 mm

A wall-mounted stainless steel worktable frees floor space while providing a rigid, hygienic surface for food preparation, plating and assembly. The unit bolts directly to the wall structure, transferring the load through a welded frame of square-section tubing. This construction eliminates legs and cross-bracing under the table, so trolleys and bins can be rolled right up to the edge without obstruction.

The pressed sandwich tabletop is formed from two sheets of stainless steel with a core of sound-damping material. This layered build absorbs vibration and reduces noise from chopping, mixing and utensil impact, making the workspace quieter than a solid plate of the same thickness. A continuous upstand along the rear edge prevents spills from running onto the floor and creates a backstop for stacked trays or loose ingredients.

To use the table, the operator simply clears the wall area, marks the fixing points, drills and anchors the frame. Once the frame is level and secure, the tabletop is bolted on. The shelf below is positioned at a standardised height for easy access, allowing storage of heavy pots, pans or bulk ingredients without lifting from the floor. Loading is distributed evenly across the surface; the 120 kg capacity applies to the entire tabletop, not a single point.

The welded stainless steel frame is made from 25 mm square tubing with wall thicknesses between 25 and 50 mm. This gives the unit its rigidity and corrosion resistance. The pressed sandwich top is sealed at the edges, preventing moisture ingress and making the surface easy to wipe clean. The frame and top are both compatible with standard catering cleaning agents and sanitising sprays.

Controls are limited to the mechanical fixings: wall anchors, frame bolts and shelf brackets. Each fixing point is sized to carry the full load, so the table remains stable even when fully loaded.

The 1400 mm length provides a continuous work surface for multiple staff or large trays, while the 600 mm depth keeps everything within comfortable reach. The 750 mm height matches standard worktop levels, aligning with adjacent hobs, sinks and prep tables. The 120 kg load rating allows the table to support heavy mixers, bulk ingredients or stacked sheet pans without deflection.

Cleaning involves wiping the stainless steel surfaces with a damp cloth and approved detergent, then drying to prevent water spots. The sealed sandwich top and welded frame have no crevices where food debris can lodge, reducing the risk of bacterial growth. The wall-mounted design leaves the floor underneath clear, so mopping is unhindered.

Two versions are available: with or without the rear upstand. The choice depends on whether the kitchen needs spill protection or an open rear edge for oversized trays.

The table is categorised under mounted work surfaces in the Novameta professional catering range.