Novameta Wall-Mounted Worktop with Grid Shelf 2800 mm

A wall-mounted stainless steel worktop frees the floor beneath it, turning the space into an extra storage zone or a clear walkway. The table is fixed to the wall at a standard working height, so chefs can prep, plate or hold equipment without bending or reaching. The grid shelf below keeps ingredients, utensils or small appliances within arm's reach while keeping the work surface uncluttered.

The pressed sandwich construction of the tabletop combines a smooth stainless steel surface with a rigid core. This method spreads the load evenly, so the worktop stays flat and stable even when fully loaded. The welded stainless steel frame transfers the weight directly to the wall brackets, preventing sag or twist over time. A uniform load of up to 120 kg can be placed anywhere on the surface without risk of deformation.

To use the table, first secure the wall brackets at the marked fixing points. Lift the table onto the brackets and lock it in place. The grid shelf slides into pre-welded runners beneath the worktop and can be removed for cleaning or repositioned if needed. An optional upstand along the rear edge stops spills from running onto the wall and can be specified at order.

The tabletop is a single pressed sandwich panel in stainless steel, chosen for its resistance to heat, moisture and impact. The frame is made from 25 × 50 mm stainless steel tube, welded at every joint for strength. The grid shelf is formed from stainless steel rods spaced to support standard gastronorm trays or loose items.

The 2800 mm length provides a continuous work surface for large-scale prep or plating. The 600 mm depth keeps everything within easy reach without overhanging the operator. The 750 mm height matches standard worktop levels in professional kitchens, so it aligns with adjacent counters and hobs. The 120 kg load rating means the table can hold bulk ingredients, heavy equipment or stacked trays without flexing.

Cleaning is straightforward: wipe the pressed sandwich top with a damp cloth and mild detergent. The grid shelf lifts out for separate cleaning or can be hosed down in place. The welded frame has no crevices, so dirt cannot collect. The optional upstand unclips for thorough cleaning behind it.

Two widths are available: 650 mm with a 3% tolerance, or 700 mm with a 5% tolerance, allowing the table to fit different wall spaces or workflows.