Novameta Wall-Mounted Worktop with Grid Shelf 700 mm

A wall-mounted stainless steel worktop creates a fixed preparation surface that clears floor space and keeps ingredients within arm's reach. The grid shelf below holds trays, pans or small appliances off the worktop, letting air circulate so surfaces stay dry and easy to wipe down.

The table is bolted to the wall at the height the kitchen needs, so the operator works without bending or stretching. A welded stainless steel frame carries the load straight to the wall fixings, while the pressed sandwich top spreads the weight evenly across its surface. The grid shelf hangs from the same frame, so it moves as one unit with the worktop and never sags or shifts.

To install, the frame is positioned against the wall, levelled, and marked for fixings. Once the frame is secured, the pressed sandwich top is laid on and fastened. The grid shelf is then slotted into place and locked. The upstand, if fitted, is added last, clipping onto the rear edge of the top. No tools are needed for the shelf or upstand once the frame is mounted.

The pressed sandwich top is a single sheet of stainless steel with a solid core, so it resists dents and stays flat under heavy pots or chopping boards. The frame is made of 25 × 50 mm stainless steel tube, welded at every joint for strength. The grid shelf is formed from stainless steel rods spaced to support standard gastronorm trays without flexing.

Controls are limited to the fixings: wall bolts secure the frame, and screws fasten the top to the frame. The upstand and grid shelf clip on without additional hardware.

A width of 700 mm gives enough room for two gastronorm pans side by side, while the 600 mm depth keeps everything within reach. The 750 mm height from floor to worktop is standard for standing work, so it matches existing equipment. The 120 kg load rating means the top can hold a full stockpot, a slicer or a stack of sheet pans without bowing.

Cleaning is straightforward: the pressed sandwich top wipes clean with a damp cloth, and the grid shelf lifts out for washing in a sink or spray booth. The welded frame has no crevices, so grease and debris do not collect. The upstand, if present, unclips for separate cleaning.

The table is available with or without an upstand, so it can be ordered to match the kitchen's layout and hygiene requirements.

Catalogue placement: wall-mounted preparation tables, stainless steel worktops.