Novameta Wall-Mounted Worktop with Grid Shelf BHS-HSX-260/60/75

A wall-mounted stainless steel worktop frees floor space in a busy kitchen while providing a sturdy, hygienic surface for food preparation, plating or holding equipment. The unit is fixed directly to the wall at a standard working height, so staff can slide trays, pots and utensils across it without lifting. A grid shelf underneath keeps ingredients, small appliances or cleaning supplies within arm's reach but off the floor, reducing clutter and speeding up workflow.

The worktop is a single pressed sandwich panel that resists warping and absorbs the clatter of metal pans. A welded stainless steel frame transfers the weight of the load straight to the wall fixings, so the table remains level even when fully loaded. The frame tubes are sized to carry the stated capacity without flexing, allowing the operator to spread heavy items evenly across the surface.

To install, the frame is first secured to the wall at the marked fixing points. The pressed top is then lowered onto the frame and bolted down. If an upstand is fitted, it clips along the rear edge to contain spills and protect the wall. Once the grid shelf is slotted into the frame, the table is ready for use. Loading is limited to 120 kg distributed evenly; concentrated loads or impacts should be avoided to prevent damage to the wall fixings.

The construction uses stainless steel throughout: a pressed sandwich top, welded frame tubes of 25 × 50 mm section, and a grid shelf. The frame is left open at the front to allow easy cleaning underneath, while the rear upstand, if present, can be removed for access to the wall.

The only control is the choice of width: 650 mm as standard, or 700 mm for an additional charge. Both versions share the same 2600 mm length and 750 mm height, creating a continuous run of worktop that can be joined end-to-end with adjacent units.

A 2600 mm length spans a typical kitchen wall, providing a single uninterrupted surface for large trays or multiple stations. The 600 mm depth keeps everything within easy reach without overhanging into the aisle. The 750 mm height matches standard worktop levels, so staff can move between this table and freestanding counters without adjusting their posture. The 120 kg load rating allows the table to hold bulk ingredients, stacked plates or small appliances such as mixers or bain-maries.

Cleaning is straightforward: the pressed top wipes clean with a damp cloth, the grid shelf lifts out for washing, and the open frame allows a mop to reach the floor beneath. The stainless steel surfaces resist corrosion and staining, so the table maintains its appearance even in a wet or acidic environment.

The product is listed in the Novameta catalogue under mounted tables, alongside other wall-fixed work surfaces and shelving units.