Novameta Wall-Mounted Worktop with Reinforced Shelf 600 BHS-HLX-60/60/75

A wall-mounted stainless steel worktop that frees floor space while providing a sturdy work surface for food preparation, plating and light assembly. The unit bolts directly to the wall, transferring weight to the building structure rather than the floor. A reinforced shelf beneath the main tabletop adds storage without adding footprint, keeping ingredients, utensils or small appliances within easy reach of the chef's hands. The worktop relies on a pressed sandwich construction: two thin stainless steel sheets bonded to a core of sound-absorbing material. This method dampens vibration and reduces noise from chopping, mixing or clattering pans, creating a quieter kitchen environment. The sandwich panel also resists flexing under load, so the surface stays flat even when fully laden. To use the table, first secure it to a solid wall at the required height. Load the main tabletop with equipment or ingredients up to the rated capacity, distributing weight evenly. Place smaller items on the lower shelf, again keeping the load balanced. The welded stainless steel frame and wall brackets carry the weight, leaving the worktop clear for tasks. Construction is entirely in stainless steel: the pressed sandwich tabletop, the welded tubular frame and the optional upstand. The frame tubes measure between 25 mm and 50 mm in section, giving strength without bulk. An upstand can be fitted at the rear to prevent spills from running onto the wall or floor. The only control is the choice of upstand: specify whether the unit is ordered with or without it. No electrical or mechanical settings are required. The 600 mm depth matches standard catering equipment, allowing the table to sit flush with adjacent units or under wall cupboards. The 600 mm width provides a compact work surface that fits into tight kitchen layouts, while the 750 mm height suits standing chefs. A maximum load of 120 kg on the tabletop means the unit can support heavy mixers, slicers or stacks of plates without sagging. The wall mounting removes the need for legs, so the space beneath the table remains open for feet or mobile trolleys. The seamless pressed top and welded frame let you slide pots and pans across the surface without snagging, so spills stay on the worktop where a quick wipe restores the hygienic finish. The pressed sandwich top has no seams or crevices where dirt can collect, and the welded frame has no fasteners to trap grime. The optional upstand is removable for thorough cleaning behind it. Two versions are available: with or without the rear upstand. The table is classified in the Novameta wall-mounted worktop range.