More from this brand
Technical data
| Attributes | |
| ARTICLE | VS8N |
| SIZE L/W/H | 1788/ 395/ 245 mm |
| VOLTAGE | 230 V |
| Temperature | +2/ +6 ºC |
| Material | Aluminum structure and AISI-304 stainless steel finish |
| CAPACITY | 8 GN 1/3x40 |
| Refrigerant | R134a |
| NOTES | Static cooling; Climate class 3; Different colours available |
Combining modern design, ergonomic construction, and professional refrigeration technology, this display case provides not only reliable performance but also an attractive presentation of products in any commercial environment. Specifically designed for sushi and cold appetizers. The display case is available in five colors: black, red, silver, oak, and white.
Temperature range: +2/ +6ºC
GN containers are included
A refrigerated display case keeps prepared dishes chilled while presenting them to customers without breaking the cold chain. The CLASSIC VS8N uses static cooling: a steady flow of cold air circulates naturally around the food, avoiding the drying effect of forced-air systems. This method preserves moisture in salads, desserts and plated items, keeping textures and colours fresh for service. An anti-drip evaporator mounted above the trays captures condensation before it forms droplets, so the glass stays clear and the display remains unobstructed.
The operator loads up to eight GN 1/3x40 gastronorm trays through rear sliding doors, then sets the digital controller to the desired temperature between +2 °C and +6 °C. LED lighting inside the case illuminates the trays evenly, drawing attention to the food without adding heat. An automatic defrost cycle runs at intervals, melting any ice build-up on the evaporator and draining it away, so the unit maintains consistent performance without manual intervention.
The structure is built from aluminium for lightness and corrosion resistance, clad in AISI-304 stainless steel for durability and hygiene. Tempered glass panels on the front and sides provide a secure, shatter-resistant view of the contents. The refrigerant used is R134a, chosen for its balance of cooling efficiency and environmental profile within the specified climate class 3.
The 230 V single-phase supply matches standard UK commercial circuits, allowing straightforward installation in most kitchens. The footprint of 1788 mm wide by 395 mm deep fits along a counter or against a wall, taking minimal floor space while offering a full metre of linear display. The static cooling system, combined with the low-temperature range, makes the unit suitable for holding chilled starters, desserts and plated dishes that require gentle, even refrigeration.
Cleaning follows from the materials and construction: stainless steel surfaces wipe clean with standard sanitising solutions, while the tempered glass can be cleaned with non-abrasive cloths to maintain visibility. The rear sliding doors allow easy access for wiping down the interior and checking the evaporator. Different exterior colour options are available to match kitchen or front-of-house decor.