SAYL INTEGRO 50/140 Ventilated Cold Showcase

A ventilated cold showcase keeps chilled goods visible and accessible while maintaining a steady low temperature. A compressor circulates refrigerant through an evaporator coil inside the cabinet, pulling heat from the air and expelling it through a condenser at the rear. The cooled air is then blown across the shelves by a fan, creating an even flow that prevents warm spots and keeps every item at the same temperature. This method is quieter and more energy-efficient than static cooling, and it recovers quickly after the doors are opened, making it suitable for high-traffic environments where the cabinet is frequently accessed.

To use the INTEGRO 50/140, plug the unit into a 230 V supply and set the desired temperature between +2 °C and +6 °C using the digital thermostat. The display updates continuously, showing the current temperature without needing to open the doors. Slide the rear doors open to load or restock products, then close them to restore the cooling cycle. The internal LED lighting switches on automatically, highlighting the contents while keeping energy use low. Adjustable legs allow the cabinet to be levelled on uneven floors or matched to the height of a worktop, ensuring stability and comfortable access.

The showcase is built from stainless steel and tempered glass, materials chosen for their resistance to corrosion, staining and impact. The fibre-glass cover protects the compressor and condenser from splashes and cleaning chemicals, preserving both appearance and function. Sliding rear doors are designed to be removed for thorough cleaning, helping maintain hygiene standards. The Danfoss compressor operates quietly and is water-resistant, while the ventilated dual turbo condenser ensures consistent cooling even during peak service.

Controls consist of an electronic thermostat with a digital readout, allowing precise temperature selection within the +2 °C to +6 °C range. The 500 W cooling power indicates the rate at which heat is removed from the cabinet, suitable for a unit of this size and climate class 3. The 230 V, 50 Hz voltage matches standard UK single-phase circuits, requiring no special wiring. The 600 mm width and depth fit neatly into most kitchen layouts, while the 1400 mm height provides ample display space without overwhelming the worktop. The 58 g charge of R600a refrigerant is a hydrocarbon with low environmental impact, used here in a quantity that complies with current regulations.

Cleaning involves wiping the stainless steel and glass surfaces with a damp cloth and mild detergent, avoiding abrasive pads that could scratch the finish. The fibre-glass cover can be cleaned with the same solution, as it resists acids and cleaning agents. Sliding doors should be removed periodically and washed separately to prevent build-up of grime. The condenser and compressor area should be kept free of dust and debris to maintain airflow and cooling efficiency.

The INTEGRO 50/140 is a standalone ventilated cold showcase designed for displaying chilled products in a professional kitchen or retail environment.