SAYL LOGIC TRIPLE CLO26S-2 three-tier hot display case

A hot display case keeps prepared dishes at serving temperature while showcasing them through clear glass panels. Heating elements beneath each shelf warm the air inside; natural convection carries the heat upward, creating an even temperature throughout the cabinet. The glass enclosure traps the warm air, preventing heat loss and maintaining a consistent environment that keeps food safe and appetising without drying it out or overcooking it.

To use the SAYL LOGIC TRIPLE CLO26S-2, position the unit on a level worktop and plug it into a 230 V supply. Adjust the four legs until the case is stable and level. Set the electronic thermostat to 70 °C using the digital control panel. Once the temperature is reached, load each adjustable shelf with the dishes or containers you wish to display. The LED lighting at the top and on each shelf switches on automatically, illuminating the food evenly. The transparent front and side panels allow customers to view the dishes without opening the case, preserving the internal temperature. When service is complete, switch off the unit and allow it to cool before cleaning.

The case is constructed from stainless steel and tempered glass. The steel frame forms the exterior and supports the three adjustable shelves, while the tempered glass panels create the front, sides and top. A protective glass profile runs along each edge, shielding the glass from knocks and scratches. The interior is lit by high-output LED strips mounted above the top shelf and at the rear of each level, ensuring every dish is clearly visible.

The electronic thermostat maintains a fixed temperature of 70 °C, suitable for holding hot foods such as roasted meats, stews, soups and baked items. The 230 V supply matches the standard single-phase circuit found in most professional kitchens. The 1020 W power rating indicates the load the unit places on the circuit when running. The overall dimensions of 1190 mm wide, 395 mm deep and 465 mm high allow the case to fit on most worktops or counters without occupying excessive floor space.

Cleaning is straightforward: wipe the stainless-steel surfaces with a damp cloth and mild detergent, avoiding abrasive pads. The tempered glass panels can be cleaned with glass cleaner or a vinegar solution; the protective profile prevents cleaning agents from seeping behind the glass. Shelves and interior surfaces should be removed or wiped down after each service to prevent grease and food debris from accumulating. The adjustable legs should be checked periodically to ensure the unit remains level and stable.

The CLO26S-2 is a countertop model designed for placement on existing work surfaces. It is part of the SAYL LOGIC range of professional display and holding equipment.