More from this brand
Technical data
| Attributes | |
| ARTICLE | S6N |
| POWER | 180W (cooling power) 90W (equipment power) |
| SIZE L/W/H | 1320/ 380/ 245 mm |
| VOLTAGE | 230 V |
| Temperature | +2/ +6 °С |
| CAPACITY | 6 GN1/3 (40 mm) |
| NOTES | front doors - 3Static cooling Climate class 3Refrigerant R600a/32G |
This professional refrigerated display case features a special body design with front and rear folding doors, providing convenient access and allowing it to be used in self-service mode. It is ideal for restaurants, cafés, pastry shops, and other retail establishments where both functionality and visual appeal are important.
Temperature range: +2 / +6 °C
GN containers are included.
A refrigerated display case keeps prepared food chilled while allowing customers to serve themselves directly from the unit. The cooling system draws heat out of the inner tank and expels it through a ventilated condenser, maintaining a steady low temperature without freezing the contents. Static cooling circulates cold air gently, preventing dehydration and preserving the appearance of plated dishes, salads and desserts. The method is quiet and energy-efficient, making it suitable for front-of-house use where noise and heat output must stay low.
The operator loads up to six GN1/3 gastronorm containers into the inner tank, then sets the electronic thermostat to the desired temperature between +2 °C and +6 °C. Once the unit is switched on, hidden sensors monitor the temperature continuously and adjust the compressor automatically. The doors slide open for self-service; when closed, the seal keeps the cold air inside. A drainage system collects condensation and directs it to an external outlet, eliminating the need for manual emptying.
The case is constructed from AISI 304 stainless steel inside and out, with PMMA and tempered-glass sliding doors. The inner tank has rounded corners and a smooth finish to simplify cleaning. LED lighting runs along the top of the cabinet, illuminating the contents evenly without adding heat. Adjustable feet allow the unit to sit level on uneven floors, and the ventilated condenser ensures reliable cooling even during peak service.
A 230 V single-phase supply powers the compressor and lighting, matching the standard circuit found in most professional kitchens. The 180 W cooling power and 90 W equipment power draw a modest load, keeping running costs low. The 1320 mm width fits standard worktop depths, while the 380 mm depth leaves room for service behind the counter. The 245 mm height allows the case to sit on a counter or trolley without obstructing sightlines.
Daily upkeep involves wiping the stainless-steel surfaces and removing the PMMA doors for thorough cleaning. The drainage system requires periodic checks to ensure the outlet remains clear. The refrigerant, R600a, is non-toxic and has a low environmental impact, complying with current regulations.
The S6N is designed for self-service use in canteens, buffets and retail food counters, where customers select chilled items directly from the display.