SCANDOMESTIC 510 L Ventilated Refrigerator GUR590WB

A ventilated cooling system circulates cold air evenly throughout the 510 L interior, pulling heat from newly loaded items faster than static cooling and maintaining a uniform temperature across every shelf. The fan cuts out the moment the door opens, preventing cold air from spilling into the kitchen and cutting unnecessary energy use. Loading is organised on four fixed wire shelves plus one adjustable shelf, each coated for easy wipe-down and rated to hold up to 30 kg. A horizontal LED strip runs along the top of the cabinet, lighting the full depth without shadows when the door is opened. The digital control panel sits at eye level on the front; a single press raises or lowers the set point between +1 °C and +10 °C, and the display shows the current temperature at all times. When the door closes, the fan restarts and the ventilated cycle resumes. A door switch stops the fan the instant the seal is broken, and the same switch activates the LED lighting. The door gasket is removable for cleaning or replacement, and the hinges can be reversed from right to left to suit the kitchen layout. Four adjustable legs raise or lower the unit by 10 mm to level it on uneven floors. The 510 L volume provides ample space for bulk storage while the 775 mm width and 707 mm depth fit standard worktop runs. At 90 kg, the refrigerator is moved on a trolley or with two people. The 220-240 V, 50 Hz supply plugs into a single-phase circuit common in professional kitchens. Climate class 4 certification means the unit operates reliably in ambient temperatures up to +30 °C and 55% relative humidity, typical of busy catering environments. Cleaning involves wiping the coated wire shelves, removing and washing the door gasket, and dusting the condenser coil at the rear. The horizontal LED strip illuminates every shelf evenly so ingredients stay visible even when containers are stacked at the back. The model is supplied with right-hand hinges as standard; left-hand hinges are achieved by reversing the existing hinges.