STAFF Ice System 1959 Ring A07 – 200 mm Diameter Seal Ring

A seal ring maintains a watertight joint between the water reservoir and the freezing surface in ice-making equipment. It prevents leaks that would otherwise allow water to escape before it can freeze, ensuring consistent ice production without waste or manual intervention.

The ring fits around the circumference of the freezing plate or evaporator. As the machine cycles, water flows over the plate and freezes into ice. The seal ring compresses slightly under the pressure of the assembly, creating a tight barrier that holds the water in place until it solidifies. Over time, the seal may wear or deform, at which point the ring must be replaced to restore the original performance.

To install the Ring A07, the operator first switches off and isolates the ice machine. The old ring is removed from its groove, and the new one is pressed into the same channel. The machine is then reassembled, ensuring the ring sits evenly without twisting. Once power is restored, the machine resumes normal operation without further adjustment.

The Ring A07 is a single-piece moulding of food-safe elastomer. Its 200 mm diameter matches the standardised freezing plates used in STAFF Ice System 1959 ice machines. The size indicates compatibility with specific models within that range, so operators should confirm the diameter before ordering.

Cleaning is limited to wiping the ring with a damp cloth during routine maintenance of the ice machine. No solvents or abrasives are required, as the material is chosen for durability and resistance to low-temperature water exposure.

This is a genuine STAFF Ice System 1959 spare part, listed in the manufacturer's catalogue under ice-machine components.