Stalgast 1800 mm worktop table with drawers and shelves

A stainless steel worktop table provides a rigid, hygienic surface for food preparation, plating and assembly in a professional kitchen. The flat top supports heavy containers, hot pans and sharp tools without flexing, while the stainless steel construction resists corrosion, absorbs no odours and wipes clean in seconds. Below the worktop, two full-width shelves create organised storage for ingredients, utensils or small appliances. The shelves are fixed at a standard height that keeps items within easy reach, reducing the need to bend or stretch. Between the shelves, drawers slide on runners to hold cutlery, cloths or small tools, keeping them separate from open storage and protected from dust. The operator loads the shelves with the heaviest or most frequently used items first, placing them on the lower shelf to keep the centre of gravity low. Lighter or less-used items go on the upper shelf. Drawers are filled with smaller items that need to be kept together and closed to keep them out of sight and safe from spills. The worktop itself is left clear for active tasks, with only the tools and ingredients needed for the current job. Construction is stainless steel throughout, with welded seams on the worktop and shelves for strength and hygiene. When the kitchen floor slopes, the legs can be fine-tuned so the worktop stays dead level under the weight of heavy mixing bowls and stacked trays. The overall footprint of 1800 mm by 600 mm fits standard kitchen layouts, while the 900 mm height matches most worktops and hobs for a continuous work surface. The depth of 700 mm gives ample room for large trays or multiple containers side by side without overhang. Drawers and shelves are sized to accept standard gastronorm trays, so ingredients and prepared items can be transferred directly from storage to the worktop without repacking. Cleaning is straightforward: the stainless steel surfaces are wiped with a damp cloth and sanitiser, while drawers and shelves are removed if necessary for deeper cleaning. The open design allows air to circulate, preventing moisture build-up and reducing the risk of mould or bacteria. This model is a fixed configuration with two shelves and integrated drawers, designed for general kitchen use.