More from this brand
Technical data
| Attributes | |
| ARTICLE | 9737210 |
| POWER | 13kW |
| SIZE L/W/H | 800/ 700 / 250 |
| VOLTAGE | 230V |
| Temperature | UP TO 300 |
Professional chrome-plated gas grill with ribbed surface
A gas grill heats a solid metal plate with open-flame burners beneath it. The ribbed surface spreads the heat evenly and leaves sear marks on meat, fish or vegetables while allowing fat and juices to drain away. The two-zone layout lets the operator run different temperatures on each side, so one zone can hold food warm while the other sears at full heat.
The operator lights the grill, sets the flame with the ergonomic knobs and waits for the plate to reach temperature. Food is placed directly on the ribbed chrome surface; the high side and rear edges keep it from sliding off. Grease and waste run down the ribbing into a central drainage hole that leads to a removable grease collector. When cooking is finished, the knobs are turned off and the surface is scraped clean while still warm.
The grill is built on a stainless-steel frame with adjustable feet for levelling on uneven floors. The front panel is laser-engraved for durability, and a device protection system can be activated from the control panel to prevent accidental ignition. Two separate 800 mm working zones give a total cooking area of 4400 cm², each zone accepting standard 800 mm gastronorm plates. The unit can be mounted on a frame base or on a cabinet base with doors for storage underneath.
A 13 kW power rating means the grill draws a steady load that requires its own dedicated circuit on a 230 V single-phase supply. The temperature range up to 300 °C covers searing, grilling and holding. The overall footprint of 800 × 700 mm fits within a standard worktop run, while the 250 mm height leaves room for a shelf or splashback above. Adjustable feet allow the unit to be levelled on uneven floors without shimming.
Cleaning follows from the ribbed surface and grease drainage. After each service the plate is scraped while still warm to remove food debris, then wiped with a damp cloth. The grease collector is emptied and washed separately. The high side and rear edges prevent spills onto the floor, reducing daily mopping.
The grill is supplied for G20 or G30 gas types and is configured for the connection specified at order.