Stalgast Corner Table 600/700 – 980127060

A corner table turns an unused angle of the kitchen into a work surface that keeps utensils, prep tools and small appliances within reach. Instead of a straight run that blocks traffic, the L-shaped top fits snugly into the corner, freeing the centre of the room for larger equipment and open workflow. The table stands on four legs, two along each wall. Adjustable feet level the top so that liquids and small items do not roll off. The height matches standard worktops, allowing staff to slide trays and containers across without lifting. To use the table, position it in the corner so the 600 mm and 700 mm sides run along the walls. Secure the adjustable feet until the top is level. Load the surface with the items that are used most often during service: bowls, knives, seasoning, small appliances or temporary storage of plated dishes. The corner location keeps these items close to hand without occupying prime linear space. The seamless stainless-steel surfaces shed hot oil and acidic sauces without pitting, so the corner stays hygienic even after years of fryer service. The top is a single sheet with a turned-down edge to contain spills. The legs are tubular and welded to a base frame for stability. No shelves or drawers are fitted, so the space beneath the top remains open for cleaning or for storing low, mobile equipment such as ingredient trolleys. The table measures 600 mm along one wall and 700 mm along the other, with a height of 900 mm. These dimensions create a footprint that fits most commercial kitchen corners while leaving enough clearance for doors and walkways. The 900 mm height aligns with standard worktops, ensuring continuity of work surfaces across the kitchen. Cleaning is straightforward: wipe the stainless steel top and legs with a damp cloth and a mild detergent. The turned-down edge prevents liquids from dripping onto the floor, and the open underside allows access for mopping. No moving parts or crevices require disassembly or special tools. The catalogue places this item under Work Tables and Preparation Surfaces, in the section for corner and space-saving units.