Stalgast Gas Range with Two 9 kW Double-Crown Burners

A gas range built for continuous service in professional kitchens, where two high-output burners deliver concentrated heat to large pots and pans. The double-crown design spreads the flame across a wider area, allowing even heating without hot spots and reducing the need to rotate cookware during long simmering or reduction tasks.

Gas enters the burner assembly and is ignited by a standing pilot flame. Once lit, the flame safety device monitors the pilot; if the flame extinguishes, the device automatically shuts off the gas supply to prevent unburned gas from accumulating. Each burner can be reduced to one-third of its maximum output, providing an economical low flame for gentle cooking or holding without scorching.

The operator places cookware on the cast iron grids, which support heavy loads and conduct heat evenly. Adjustable feet beneath the unit allow the range to be levelled on uneven floors, ensuring stability and preventing spills. The front controls set the gas flow to each burner, giving precise temperature control across the full power range.

The body of the range is sized to fit standard worktop depths, while the width accommodates two large vessels side by side. Cast iron grids and a robust frame withstand the weight of commercial cookware and the daily wear of a busy kitchen. The pilot flame remains lit at all times, eliminating the need for manual ignition during service.

Cleaning involves lifting the grids to wipe the burner ports and drip tray beneath. The flame safety device requires no maintenance beyond keeping the ports clear of debris. The range is available in alternative gas versions G27 and G31 to match local supply pressures.

Total power draw is distributed across two 9 kW burners, requiring a dedicated gas line capable of supplying the combined load. The footprint of 1160 mm by 580 mm fits within standard kitchen layouts, while the height of 380 mm allows comfortable use at standing height without stooping.