Stalgast Glasses Holder 5 for Bars and Cafés

A five-row glass holder keeps barware organised on the worktop without taking the depth of a full cupboard. Each row holds a line of glasses upright, letting staff reach for the right size without lifting or sorting. The open front and shallow footprint leave the glasses visible and accessible, so the operator can see stock levels and refill quickly during service. The holder stands on the worktop or shelf, secured by its own weight and the friction of the base. Glasses slide into the rows from the front, resting on the rungs that keep them separated. No doors or lids are needed, so the holder remains ready for use without extra steps. The design suits tumblers, wine glasses, pint glasses and cocktail glasses, as long as the rim fits the spacing of the rungs. Operation is a single motion: place the glass into the row, push it back until it rests on the rungs, and release. Retrieval is the reverse: grasp the glass, lift it clear of the rungs, and draw it forward. The holder does not tilt or pivot, so glasses stay in place even when the worktop is busy. Construction is stainless steel, standardised for commercial use. The frame is welded, with no moving parts or adjustments. The rungs are fixed at equal intervals, giving each row the same capacity. The base is flat, with no feet or pads, so the holder sits flush on any level surface. The footprint of 70 mm depth and 355 mm width fits behind the bar counter or on a shelf above the worktop. The 480 mm height allows stacking of standard barware without crowding the shelf above. No tools or assembly is required; the holder is supplied ready to use. The stainless-steel rods let you slide each glass off without snagging, so wiping between shifts is quick and streak-free. The stainless steel surface can be wiped with a damp cloth and commercial detergent. The open rows allow access to the rungs, so no glass residue or liquid collects out of reach. The holder is not dishwasher-safe, as the high heat and water pressure could loosen the welds over time. The holder is supplied as a single unit with five rows, branded Stalgast. No variants or additional parts are listed for this article.