Stalgast Table for Coffee Machine L 486710

A stainless steel worktable built to hold a commercial coffee machine while organising the barista's tools and ingredients around it. The unit provides a stable, hygienic surface at standard worktop height, with cut-outs and compartments tailored to the coffee service workflow. The table's design centres on a dedicated aperture in the worktop, sized and positioned for direct connection to the coffee machine's water inlet and waste outlet. This eliminates flexible hoses across the counter, reducing trip hazards and keeping the workspace clear for dosing, tamping and milk steaming. Beneath the worktop, storage is organised in three distinct zones. A tilting drawer fitted with a brake and a coffee grounds striker collects spent pucks, allowing the barista to eject them without lifting or scraping. The brake prevents the drawer from swinging open unexpectedly, while the striker breaks up clumps for easier disposal. Adjacent to the drawer, a lockable cupboard houses the water softening filter, protecting it from dust and accidental knocks. A separate utensil drawer keeps tampers, knock boxes and cleaning brushes within arm's reach but out of sight. At the rear of the worktop, a small sink with a removable drip tray catches spills and rinse water. The tray can be lifted out for emptying and cleaning, preventing standing water and odours. The sink's position keeps it close to the coffee machine's steam wand and group head, where most rinsing occurs. The table's footprint of 1600 by 700 millimetres provides ample space for two baristas to work side by side, with room for scales, knock boxes and milk jugs on the worktop. The height of 1000 millimetres matches standard counter heights in professional kitchens and cafés, ensuring ergonomic access to the coffee machine's controls and the table's storage compartments. All surfaces are constructed from stainless steel, chosen for its resistance to heat, moisture and cleaning chemicals. The material does not absorb stains or odours, and its smooth finish allows for quick wiping between service periods. The tilting drawer and sink tray are also stainless steel, while the cupboard and utensil drawer interiors are lined with the same material for consistency and durability. The stainless-steel cupboard and drawer fronts shed water and grounds, so a damp cloth restores the surface without scrubbing or residue. The worktop, sink and drip tray can be wiped down with a damp cloth and sanitiser after each shift. The tilting drawer and grounds striker should be emptied and rinsed daily to prevent residue build-up. The cupboard and utensil drawer should be checked weekly for spills or debris, and the water softening filter replaced according to the manufacturer's schedule. The table is supplied as a single unit, with no variants or additional configurations listed.