TEFCOLD CK7310X1 Ventilated Cooling Counter for Professional Kitchens

A ventilated cooling counter keeps prepared food chilled by circulating cold air evenly around every shelf. Fans draw warm air across an evaporator coil, removing heat before returning the cooled air to the cabinet. This method prevents hot spots and maintains a consistent temperature throughout, ensuring ingredients stay fresh without freezing or drying out. The CK7310X1 is loaded through self-closing doors that seal automatically after each use, reducing energy loss. Three grey wire shelves, sized to GN1/1 gastronorm trays, slide out for easy access to stored items. The operator sets the desired temperature between -2 °C and +8 °C using the digital controller, which also initiates automatic defrost cycles to keep the evaporator free of ice. Bluetooth and NFC connectivity allow remote monitoring and adjustment from a mobile device, logging temperature data without opening the doors. The counter is built from stainless steel, including the removable table top that sits flush with standard worktops. Adjustable legs level the unit on uneven floors, while the ventilated cooling system remains concealed behind the interior panels. The refrigerant, R600a, is contained in a sealed circuit with a charge of 95 g, designed for low environmental impact. A power rating of 0.3 kW reflects the load on the electrical supply, suitable for a standard 220-240 V single-phase circuit found in most commercial kitchens. The 291 L volume provides storage for bulk ingredients or plated dishes, while the 1795 mm width fits into a standard worktop run without overhang. At 134 kg, the counter is moved with a pallet truck or trolley, and the adjustable legs then stabilise it in place. The seamless stainless steel exterior sheds grease and spills during service, letting you restore a hygienic finish between lunch and dinner without scrubbing. The wire shelves and removable table top lift out for thorough washing, while the automatic defrost cycle reduces manual maintenance of the cooling system. The controller's digital interface includes a cleaning mode that disables cooling during deep cleaning, preventing damage to the compressor.