Tefcold Left-Hand Top Hinge Base for Refrigeration Doors

A top hinge base secures the upper pivot of a refrigeration door, allowing it to swing open and closed without sagging or misalignment. The hinge transfers the weight of the door to the cabinet frame, keeping the seal tight and the movement smooth. Without a properly fitted hinge base, the door can drag, the gasket can wear unevenly, and cold air can escape, raising running costs and shortening the life of the unit. This left-hand top hinge base is mounted on the cabinet frame at the top corner of the door opening. The hinge pin sits in the base, and the door bracket rotates around it. The base is fixed with screws, ensuring the door remains level and aligned with the cabinet throughout its service life. To fit the hinge base, the door is first removed from the cabinet. The old base is unscrewed from the frame, and the new base is positioned in the same location. The screw holes are aligned, and the base is secured. The door bracket is then reattached to the hinge pin, and the door is rehung. The alignment is checked, and the screws are tightened to prevent any movement. The hinge base is constructed to match the original equipment specifications for Tefcold refrigeration units. It is designed to fit the standardised mounting points used across the Tefcold range, ensuring a direct replacement without modification. This spare part is compatible with Tefcold commercial refrigerators and freezers that use a left-hand top hinge assembly. This hinge base is engineered to carry the weight of a fully loaded refrigeration door without sagging, ensuring a consistent seal every time the door is closed.