TEFCOLD Monoblock Freezing Unit CRU1520N for Professional Kitchens

A monoblock freezing unit draws heat from stored food and expels it outside the cabinet in a single sealed circuit. The refrigerant circulates through an evaporator coil inside the unit, absorbing warmth from the air and lowering the temperature to freezing levels. A compressor then pressurises the refrigerant, raising its temperature before it passes through a condenser coil, where the heat is released into the surrounding air. This continuous cycle maintains the set freezing temperature without mixing the internal and external air, reducing frost build-up and energy use. The CRU1520N is loaded through a front-opening door. Once stocked, the digital controller is set to the desired temperature between -20 °C and -10 °C. The unit starts automatically, with the display showing the current internal temperature. Condensate, formed as moisture in the air freezes, is evaporated automatically, eliminating the need for manual draining. The unit operates in ambient temperatures up to +43 °C and 65% humidity, making it suitable for busy kitchens with fluctuating conditions. The cabinet is finished in stainless steel, providing a durable, easy-to-clean surface that resists corrosion and maintains hygiene standards. The digital controller allows precise temperature management, with the display providing real-time feedback. The 220-240 V voltage requirement means the unit connects to a standard single-phase power supply, commonly available in commercial kitchens. The 110 kg weight indicates a sturdy construction, designed to remain stable during operation but requiring careful positioning during installation. The 600 mm width, 1046 mm depth and 870 mm height define the footprint, which must be accommodated on the kitchen floor or worktop, with sufficient clearance for ventilation around the condenser coil. The 34.51 kWh/24h power rating reflects the energy consumed over a full day of operation, a consideration for kitchen energy planning. The seamless stainless steel cabinet sheds grease and spills during service so a quick wipe restores the hygienic finish between shifts. The automatic condensate evaporation system removes the need for manual drainage, but the condenser coil should be checked periodically to ensure it remains free of dust and debris, which could impede heat exchange. The refrigerant, R290, is used in a 200-gram charge, a detail relevant for servicing and compliance with refrigeration regulations. The CRU1520N is categorised as a monoblock freezing unit, designed for commercial refrigeration applications where consistent freezing temperatures are required.