More from this brand
Technical data
| Attributes | |
| ARTICLE | RIC1760X1 |
| POWER | 5,5 kW/24h |
| SIZE L/W/H | 1760 / 994 / 2201,5 mm |
| VOLTAGE | 220-240V |
| Temperature | +2 to +10 °C |
| VOLUME | 832 l |
| WEIGHT | 250 kg |
| NOTES | Suitable for 2 x GN2/1 or 2 x 600x400mm or 4 x GN1/1 20-tray trolleys |
Roll-In Cooler for professional kitchens
The RIC Roll-In Cooler is designed with efficiency and convenience in mind. Crafted from durable SS304 stainless steel, this ventilated cooling solution is designed to keep your prepared meals and dishes fresh and ready to serve. Ideal for event venues, buffet areas, bakeries, and cafeterias, this model can accommodate 2 x GN2/1 or 2 x 600x400mm or 4 x GN1/1 20-tray trolleys with ease (sold separately).
A roll-in cooler brings refrigerated storage directly to the worktop without transferring trays. A refrigeration unit circulates cold air through a sealed cabinet, pulling heat from the food and maintaining a steady low temperature. The ventilated system spreads the cold evenly, so every tray chills at the same rate and no hot spots form inside the unit.
Load two GN2/1 trolleys or four GN1/1 trolleys through the full-width door. The digital controller sets the temperature between +2 °C and +10 °C; the display shows the current reading. Automatic defrost cycles clear ice from the evaporator without manual intervention, keeping the airflow unobstructed. Once the trolleys are inside, the cooler runs continuously, holding the set temperature until the food is needed.
The cabinet is built from stainless steel inside and out, forming a smooth, seamless interior that resists corrosion and cleans quickly. A single door seals the entire front, giving unobstructed access for roll-in trolleys. The 832 L volume matches the capacity of two standard GN2/1 trolleys or four GN1/1 trolleys, allowing bulk storage of prepared ingredients or plated dishes.
The digital controller adjusts the temperature and initiates defrost cycles. A separate display shows the internal temperature, so the operator can check conditions without opening the door.
The 220-240 V voltage requirement matches the standard single-phase supply in professional kitchens, drawing power continuously to maintain the set temperature. The 250 kg weight means the unit is floor-standing and must be positioned before delivery. The 1760 mm width, 994 mm depth and 2201.5 mm height give the footprint of two full-size trolleys side by side, so the cooler fits where the trolleys are used.
Stainless steel surfaces wipe clean with a damp cloth; the ventilated cooling system requires occasional vacuuming of the condenser coils to maintain airflow. Automatic defrost reduces manual upkeep, but the drain pan should be checked and emptied regularly.
The cooler is climate class 5, designed for high performance in warm surroundings, so it maintains temperature even when the kitchen is hot or humid.
Trolleys are not included with the cooler.