TEFCOLD UC5240 Freezing Counter with Four GN1/1 Drawers

A freezing counter keeps perishable ingredients at safe holding temperatures while presenting them at worktop height for easy access during service. Instead of relying on still air, a small fan circulates chilled air evenly across every shelf, eliminating hot spots and ensuring every drawer reaches the set temperature quickly. The refrigerant absorbs heat from the air inside the cabinet and releases it outside, maintaining a consistent cold environment without manual defrosting cycles. The operator loads sheet pans or gastronorm containers into the four GN1/1 drawers, slides them closed, and sets the desired temperature between +2 °C and +8 °C. Once plugged into a 220-240 V supply, the unit starts automatically; the fan and compressor run as needed to hold the temperature. Adjustable legs level the counter on uneven floors, and the ventilated cooling system keeps the interior dry, preventing ice build-up. The cabinet is constructed from AISI 304 stainless steel, chosen for its resistance to corrosion and ease of cleaning. The exterior and interior surfaces are seamless, with rounded corners to eliminate dirt traps. Four full-extension GN1/1 drawers run on smooth glides, allowing complete access to stored items without removing adjacent drawers. Controls consist of a simple thermostat dial that sets the temperature within the +2 °C to +8 °C range. The automatic defrosting system removes excess moisture without operator intervention, while the ventilated cooling fan ensures even air distribution throughout the 170-litre interior. A power rating of 0.3 kW indicates a modest electrical load, suitable for standard kitchen circuits. The 220-240 V requirement matches the single-phase supply used in most professional kitchens. The 82 kg weight means the unit can be moved by two people or a small trolley, while the 1360 mm width fits standard worktop runs without overhang. Each GN1/1 drawer slides out freely so the entire stainless steel interior can be reached without moving the counter from its kitchen station. The automatic defrosting system reduces manual maintenance, though the drain tray should be checked periodically to ensure it remains clear. The four GN1/1 drawers can be removed for thorough cleaning, and the adjustable legs allow the unit to be tilted slightly for easier access to the base. The UC5240 is a counter model, designed to integrate into kitchen worktops for seamless workflow. It is part of the TEFCOLD range of refrigeration equipment, standardised for professional catering environments.