CASTA L7/KUPG6BB.6G Professional Gas Hob with Worktop

A professional gas hob built for high-output kitchens, combining six open burners with an integrated stainless-steel worktop. The hob heats by burning gas directly beneath cast-iron grates, delivering immediate, adjustable flames that respond instantly to the control knobs. This direct flame contact transfers heat evenly to pots and pans, allowing precise temperature control for searing, simmering or boiling without the lag of electric elements.

The worktop is pressed with a 22 mm deep recessed channel that runs along its perimeter. This channel collects spills and juices as they occur, keeping the surface clear and reducing the risk of cross-contamination during service. The operator lights each burner manually using a protected pilot flame, giving full control over which burners are active and when. A thermoelectric safety valve on each burner shuts off the gas automatically if the flame is extinguished, preventing unburned gas from accumulating.

To use the hob, the operator turns the control knob to the pilot position, presses it to ignite the small flame, then holds it for a few seconds until the thermocouple heats and locks the valve open. The knob is then turned to the desired flame setting. Grates are designed to support either a single large pot or two smaller pans side by side, allowing flexibility in menu planning. Adjustable stainless-steel legs level the unit on uneven floors and raise it to a comfortable working height.

The hob is constructed from AISI 304 18/10 stainless steel, a grade chosen for its resistance to corrosion and staining in a busy kitchen. Cast-iron burners are coated with a glossy porcelain enamel that withstands acids and repeated cleaning. Control knobs are made from a heat-resistant composite with a cool-grip surface, reducing the risk of burns during prolonged use.

The 1200 mm width provides space for six burners without crowding, making it suitable for kitchens that need to run multiple pans simultaneously. The 700 mm depth fits standard worktop depths, allowing seamless integration into existing counters or islands. The 275 mm height, excluding legs, keeps the cooking surface at a comfortable working level when the unit is placed on a base cupboard or stand.

Cleaning follows from the materials used: the stainless-steel worktop and channel can be wiped down with a damp cloth and mild detergent after each service. Porcelain-coated grates and burners are removed for deeper cleaning, allowing access to the hob body beneath. The recessed channel is designed to be rinsed out, preventing build-up of food debris. Adjustable legs should be checked periodically to ensure the hob remains level and stable.

The hob is certified to EC standards, confirming compliance with European safety and performance requirements for commercial gas appliances.