CASTA Professional Gas Hob Surface P7/KUPG4BB.2M2G

A gas hob surface engineered for continuous service in professional kitchens, where open burners deliver instant, adjustable heat under direct control. The hob draws mains gas through four separate valves, each feeding a burner that produces a visible flame. The operator lights each burner manually, allowing precise timing and eliminating the need for a standing pilot. A thermocouple safety device shuts off the gas supply if the flame extinguishes, preventing unburned gas from accumulating.

The sequence of use begins with positioning the pan on the cast-iron grate above the chosen burner. The control knob is pressed and turned to the ignition position, creating a spark that lights the gas. Once lit, the knob is released and adjusted to the desired flame height, from a gentle simmer to full power. The hob remains in operation until the knob is turned off, at which point the thermocouple cools and the gas supply stops automatically.

Construction centres on a pressed stainless-steel worktop with a recessed trough around the perimeter. This trough catches spills and liquids, directing them away from the burners and making the surface easier to wipe clean. The worktop is fabricated from AISI 304 18/10 stainless steel, a grade chosen for its resistance to corrosion, acids and mechanical damage. The finish is a scotch-brite satin that reduces visible scratches and fingerprints while maintaining a professional appearance.

Each burner is an open cast-iron ring, chrome-plated for durability and heat distribution. The grates above the burners are made from high-temperature porcelain-enamelled cast iron, which withstands repeated heating cycles and resists acidic foods. Control knobs and handles are moulded from heat-resistant material that remains cool to the touch even after prolonged use, reducing the risk of burns.

Four adjustable legs, also in AISI 304 stainless steel, allow the hob to be levelled on uneven floors or matched to the height of adjacent worktops. The overall footprint of 800 mm by 700 mm fits standard kitchen runs, while the 305 mm height keeps the cooking surface at a comfortable working level.

The power specification of 4.5 kW and 7.5 kW per pair of burners indicates the load on the gas supply. A 4.5 kW burner is suited to simmering and medium-heat tasks, while the 7.5 kW burners provide the rapid heat needed for searing and boiling. The combination allows multiple dishes to be cooked simultaneously at different intensities.

Cleaning follows from the materials and construction. The stainless-steel worktop can be wiped with a damp cloth and mild detergent, while the recessed trough is rinsed to remove accumulated liquids. Cast-iron grates and burners are removed for thorough cleaning, soaking in warm water to loosen grease before scrubbing. The heat-resistant knobs and handles are wiped down without risk of warping or discolouration.

The hob is certified to European Community safety and quality standards, confirming compliance with professional kitchen regulations.

Catalogue placement: professional gas cooking equipment, hob surfaces.