Bubble Chair with Wood Legs for Commercial Lounges

A transparent acrylic shell forms the seat and backrest, creating a floating bubble that defines the chair's look and comfort. The shell is moulded in one piece, so there are no seams or joints to trap dirt or weaken under weight. Air circulates freely around the occupant, reducing heat build-up during long sittings in busy lounges and waiting areas.

The chair rests on four solid wood legs that slope outward for stability. Each leg is fixed to the shell with a metal bracket, transferring the load directly to the floor without stressing the acrylic. The legs are cut from hardwood, chosen for its natural resistance to wear and its ability to absorb minor impacts without splintering or denting.

Height adjusts in discrete steps between 440 mm and 850 mm, allowing the chair to match standard café tables or raised bar counters. The mechanism is built into the leg brackets; the operator lifts the shell until it locks at the desired setting, then lowers it the same way when the chair is moved or stored.

The seat measures 540 mm across, giving enough space for most adults without taking up the width of two standard chairs. The 500 mm depth lets the occupant lean back fully into the curved shell, while the 3090 gr weight keeps the chair light enough to shift by hand for cleaning or re-arranging seating.

Cleaning follows from the materials: wipe the acrylic shell with a damp cloth and mild detergent to remove fingerprints and dust; polish the wood legs with a dry microfibre cloth to maintain the grain. The metal brackets can be cleaned with the same damp cloth, avoiding abrasives that could scratch the finish.

The catalogue places this model in commercial seating for cafés, bars, hotel lobbies and staff break rooms.