Chair Sara for Professional Catering Workstations

A chair built for the demands of a professional catering kitchen, where staff stand for long shifts but also need seated support at workstations for tasks like plating, garnishing or paperwork. The Chair Sara by BHS provides an adjustable-height seat that can be raised or lowered to match the height of counters, prep tables or till points, allowing the user to alternate between standing and sitting without leaving the work area.

The chair operates on a simple gas-lift mechanism: a lever beneath the seat compresses a sealed cylinder of pressurised gas, allowing the seat to glide smoothly up or down. When the lever is released, the gas expands and locks the seat at the chosen height. This system requires no tools, electricity or manual pumping; the operator simply sits, presses the lever and adjusts until the seat aligns with the work surface. The base remains firmly on the floor throughout, distributing the user's weight across a wide footprint so the chair does not tip or wobble during use.

To use the chair, the operator pulls the lever, lowers the seat to the desired height, releases the lever to lock it, and sits. When standing is preferred, the lever is pressed again, the seat is raised, and the chair can be rolled aside or left in place for the next seated task. The adjustment range spans from a low position suitable for standard desk-height tasks to a raised position that matches typical catering worktops, ensuring the chair can be set to the exact height needed for comfortable, ergonomic support.

The construction is a steel frame finished in a durable powder-coated paint, providing resistance to the moisture, heat and cleaning chemicals found in commercial kitchens. The seat and backrest are upholstered in a wipe-clean vinyl that resists stains and can be sanitised between shifts. The base is fitted with five castors, allowing the chair to be moved easily across hard floors without scratching or marking.

The single control is the gas-lift lever located beneath the front edge of the seat. Pressing the lever releases the height lock, and releasing it locks the seat at the new height. No other settings or adjustments are required.

The size range of 440 mm width, 510 mm depth and 440–790 mm height means the chair fits beneath most catering workstations and can be stored in tight spaces when not in use. The footprint of 510 mm by 440 mm provides a stable base that does not overhang work surfaces, while the adjustable height allows the chair to be set low enough to slide under counters or high enough to align with raised prep areas. The weight of the chair, though not specified, is sufficient to prevent tipping but light enough to be moved by a single operator.

Cleaning is straightforward: the vinyl upholstery can be wiped down with a damp cloth and sanitiser, and the steel frame can be cleaned with standard kitchen surface cleaners. The castors should be checked periodically for debris that could impede movement, and the gas-lift mechanism should be kept free of grease or food particles to ensure smooth operation.

The Chair Sara is a single model with no variants or additional configurations. It is designed as a standalone seating solution for professional catering environments and does not require compatibility with other equipment.

Catalogue placement: seating and ergonomic support for professional catering workstations.