Corner Cupboard with Doors, 660 mm Height

A corner cupboard organises worktop space in a professional kitchen by fitting into the angle where two walls meet. The angled back panel follows the corner, while the doors open along the front edges, giving access to the full depth of the shelves without blocking the aisle. This shape reclaims floor area that a straight run would waste and keeps ingredients or utensils within arm's reach of two work zones at once. The unit stands on adjustable feet that level it on uneven floors and raise the base clear of spills. Shelves inside are fixed at set heights, so each shelf carries the same load without sagging. Doors are hinged to open fully, allowing unobstructed access to every shelf. A soft-close mechanism slows the door as it nears the frame, preventing slams that could disturb nearby work. To use the cupboard, open one or both doors, place items on the shelves, then close the doors. The soft-close hinge takes over on the final few degrees, so no manual pressure is needed to secure the door. Adjustable feet are set once during installation and rarely changed afterwards. The cupboard is constructed from stainless steel, including the body, shelves, doors and hinges. Stainless steel resists corrosion from kitchen moisture and cleaning chemicals, and does not absorb odours or stains from food. Controls are limited to the soft-close door hinges, which require no user setting. The hinges operate automatically whenever the door is closed. The stated dimensions of 1100 mm by 540 mm by 660 mm, or 1100 mm by 640 mm by 660 mm, describe the footprint and height of the unit. The 1100 mm side runs along one wall, the 540 mm or 640 mm side along the adjacent wall, and the 660 mm height fits beneath standard worktops. The footprint determines the corner space the cupboard occupies, while the height ensures it does not interfere with overhead equipment or lighting. The smooth melamine finish lets you wipe spills straight off the doors without scrubbing or leaving streaks. The smooth finish prevents dirt from adhering, and the absence of crevices or seams simplifies maintenance. Shelves can be removed if deeper cleaning is required, though the entry does not specify a method for removal. Two size variants are available: 1100 mm by 540 mm by 660 mm, and 1100 mm by 640 mm by 660 mm. Both variants share the same 660 mm height and corner configuration. The product is categorised as a corner cupboard within the BHS professional kitchen storage range.