Corner Worktable with Shelf for Professional Kitchens

A corner worktable reclaims unused space where two walls meet, turning an awkward angle into a stable work surface and storage shelf. The angled top follows the room's geometry, allowing staff to stand close to the wall without losing reach, while the shelf below holds trays, containers or small appliances off the floor but within easy reach. The table is positioned by aligning the back edges with the walls; once in place, the top provides a continuous surface for food prep, plating or holding equipment. The shelf acts as a secondary level, keeping ingredients or utensils organised and visible without cluttering the main worktop. Because the unit spans the corner, it resists side-to-side movement, reducing the need for wall brackets in many kitchens. Construction is a welded frame of square-section steel tubing, finished in a durable powder coat that resists moisture and cleaning chemicals. The worktop and shelf are solid stainless steel, standardised for hygiene and easy sanitising. Adjustable feet at each corner level the table on uneven floors and prevent rocking. The 2200 mm and 1400 mm dimensions refer to the two front edges that meet at the corner; the 800 mm depth gives ample overhang for standing room, while the 900 mm height matches standard worktop levels in professional kitchens. These measurements allow the table to slot into corners without protruding into walkways, preserving clear circulation space. The seamless stainless steel top lets you slide heavy stock pots from the corner shelf to the prep area without snagging, while the damp cloth lifts grease splatters before they cool and harden. The powder-coated frame can be cleaned with the same solution, avoiding abrasive pads that could damage the finish. When the kitchen floor settles under daily loads of stacked crates, the screw-in feet let the chef re-level the corner table in seconds without shimming or calling maintenance.