NN47 Table Top with Two Sinks

A stainless steel table top with two integrated sinks provides a compact workstation for washing, rinsing and food preparation in professional kitchens. The unit sits directly on an existing counter or stand, adding sink capacity without requiring a separate base.

The principle is straightforward: a flat work surface supports food, utensils and containers while the two sinks below hold water for washing, soaking or draining. The sinks are deep enough to submerge large pots and pans, and their position side by side allows one sink to be used for washing while the other holds clean water for rinsing. The continuous stainless steel surface resists corrosion, heat and impact, and the seamless welds between the worktop and sinks prevent dirt from collecting in corners.

To use the table top, the operator connects the sinks to the kitchen's hot and cold water supply via the taps fitted to the rear rim. Waste water drains through outlets in the base of each sink, which connect to the kitchen's waste pipes. The work surface is kept clear for food preparation, and the sinks are filled or emptied as needed. When not in use, the sinks can be covered with removable grids or boards to create additional work space.

Construction is entirely in stainless steel, including the worktop, sink bowls and rim. The overall dimensions of 1455 mm wide, 700 mm deep and 40 mm high give a generous work surface while keeping the unit compact enough for small kitchens. Each sink measures 305 mm wide, 509 mm long and 215 mm deep, providing ample volume for washing large items without taking up excessive space on the worktop.

The table top has no built-in controls; taps and waste outlets are connected to the kitchen's existing plumbing. The unit is designed to be placed on a sturdy counter or stand, which must support its weight and the additional load of water and equipment.

The footprint of 1455 by 700 mm determines the space the unit occupies on the worktop or stand. The 40 mm height is the thickness of the stainless steel top, which must be accounted for when planning the overall height of the workstation. The two sinks add washing capacity without requiring a separate sink unit, making the table top a practical addition to kitchens where space is limited.

Cleaning is simple: the stainless steel surface is wiped down with a damp cloth and mild detergent, and the sinks are scrubbed with a non-abrasive pad to remove food debris. The seamless welds prevent dirt from accumulating in joints, and the smooth finish resists staining. Regular cleaning prevents corrosion and maintains hygiene.

The NN47 is a single model with no variants. It is placed in the catalogue under Table Tops and Workstations, where it is grouped with other stainless steel work surfaces and sink units.