NN70 Stainless Steel Worktable with Twin Sinks

A stainless steel worktable with two integrated sinks provides a continuous surface for food preparation, washing and draining in a single unit. The flat worktop holds ingredients, utensils and containers while the sinks below allow water to be drawn and waste to be rinsed away without moving from the station. An undershelf beneath the sinks adds storage for clean pots, pans or ingredients, keeping them off the floor and within reach of the operator. The operator loads the worktop with the day's mise en place, places dirty items directly into the sinks, and uses the undershelf for backup stock or clean equipment. Water is drawn from the tap above each sink, and waste is drained through the built-in outlets. The continuous stainless steel surface prevents spills from seeping between separate units and makes wiping down straightforward after service. Construction is fully welded stainless steel throughout, including the worktop, sinks, undershelf and legs. The worktop measures 2900 mm long by 700 mm deep, giving a spacious area for multiple tasks. Each sink is 600 mm wide, 500 mm front-to-back and 300 mm deep, allowing large pots and trays to be washed without tilting. The unit stands 900 mm high, matching standard worktop heights in professional kitchens. No controls are fitted; water is supplied through separate taps mounted above the sinks. The 2900 mm length suits large kitchens where multiple staff work side by side, while the 700 mm depth keeps everything within arm's reach. The 900 mm height reduces bending and fatigue during long shifts. The undershelf adds usable space without increasing the footprint, and the welded construction prevents dirt traps at joints. The seamless welds and brushed stainless steel surface let water and food debris slide straight into the sinks without catching in corners or seams. Stainless steel is wiped down with detergent and hot water, and the sinks are scrubbed with non-abrasive pads to remove food debris. The continuous surface allows spills to be pushed directly into the sinks, and the absence of seams or crevices prevents grease build-up. The unit is moved by lifting from the undershelf or legs, and the weight ensures stability during use. The NN70 is a single model without variants. It is placed in the catalogue under Worktables, Sinks & Tabling.