Pump for GN1/3 Gastronorm Containers

A pump designed to transfer liquids and semi-solid mixtures directly from GN1/3 gastronorm containers. Instead of ladling or decanting, the unit draws the contents through a flexible hose and expels them under controlled pressure. This method keeps the container stable on the worktop while the operator directs the flow to serving dishes, holding tanks or processing stations.

The pump operates by creating a low-pressure zone inside the intake hose, pulling the product upwards and then pushing it through the outlet. A motor drives an impeller or rotor, which moves the contents without crushing delicate pieces. The speed and pressure are set by the controls, allowing the operator to adjust for thin sauces, thick purées or mixtures containing solid fragments.

To use the pump, the operator lowers the intake hose into a GN1/3 container filled with the product. The hose is positioned clear of the base and sides to avoid blockages. The outlet hose is placed over the target vessel, and the pump is switched on. The operator monitors the flow, adjusting the tap or speed setting as needed to maintain a steady stream. Once the container is empty or the required quantity is transferred, the pump is switched off and the hoses are removed for cleaning.

Construction is stainless steel for the pump head and housing, with food-grade silicone or reinforced PVC hoses. The intake hose is sized to fit the 150 mm width of a standard GN1/3 gastronorm pan, ensuring a secure seal without adapters.

Controls include an on/off switch and a variable tap or speed dial. The tap regulates the flow rate, allowing the operator to slow the transfer for thick mixtures or increase it for thin liquids.

The pump is available in two versions: the standard BHS450335 for general use, and the BHS450336 for thicker sauces and mixtures containing solid pieces. The latter features a high-output tap and a more powerful motor to maintain flow without clogging.

Compatibility is limited to GN1/3 gastronorm containers with a 150 mm internal width. The pump is not designed for larger or smaller pans without additional fittings.

This pump is listed in the catalogue under Food Transfer and Holding Equipment, alongside other tools for moving and portioning bulk ingredients.