Table Base C-47 for Professional Worktops

A sturdy table base provides the foundation for a professional worktop, holding the surface at a fixed height while allowing adjustment to level the top on uneven floors. The C-47 base uses a central steel column bolted to a wide circular foot; five adjustable feet at the base corners lift or lower each side independently so the worktop remains stable and level under load. This design spreads the weight of heavy equipment, food containers and repeated cleaning without tipping or wobbling, even when the floor slopes. Assembly begins with the circular foot, which is bolted to the central column. The top mounting plate, a square steel pad, is then fixed to the column with the supplied screws. Once the column stands upright, the five adjustable feet are threaded into the base corners and turned until the column is plumb. The worktop is placed on the mounting plate and secured with screws purchased separately; the plate's 250 mm square surface and 3 mm thickness give a firm platform for tops up to 800 mm in diameter. The base is constructed from black painted steel throughout: the circular foot, the central column and the top mounting plate. Painted steel resists corrosion in a kitchen environment and can be wiped clean with a damp cloth. The five adjustable feet are threaded steel rods with plastic caps to protect the floor. Controls are limited to the five adjustable feet, each of which is turned by hand to raise or lower that corner of the base. No electrical or mechanical settings are required. The maximum top size of 800 mm diameter determines the largest work surface the base can support, while the 730 mm height sets the working level for food preparation or equipment mounting. The 11 kg weight allows two people to move the base into position before the worktop is added. The 450 mm diameter circular foot gives a stable footprint that fits beneath most professional worktops without overhang. Cleaning is straightforward: the painted steel surfaces are wiped with a damp cloth to remove grease and food debris. Each adjustment foot locks the column plumb so the worktop stays steady when rolling dough or chopping vegetables. Variants available for an additional charge include different heights and colours from the RAL palette. The C-47 base is listed in the catalogue under Table Bases, Worktop Supports and Assembly Kits.