TOLIX PARIS100 Stacking Steel Chair in Black

A stacking chair built for the demands of professional catering, where seating must be moved, stored and deployed quickly without damage to floors or furniture. The TOLIX design uses bent and welded steel to create a rigid frame that carries loads up to 120 kg while keeping the chair light enough to lift with one hand.

The principle is simple: a single sheet of steel is cut, bent and welded into a continuous loop that forms seat, back and legs. This monocoque construction spreads weight evenly, so the chair does not twist or flex under load. The black matte powder coating is baked onto the steel, creating a surface that resists scratches, spills and daily wear. Because the coating is non-porous, it wipes clean with a damp cloth and does not trap dirt or bacteria.

To use, place the chair where needed; the plastic glides on each leg prevent floor marking. When service ends, lift the chair by the seat edge and stack it on top of another. Protective bumpers on the reinforcing beams ensure that stacked chairs do not scratch each other, allowing up to fifteen chairs to be stored in a single column. The 4.2 kg weight means one person can carry several chairs at once, and the compact 390 mm width allows them to be stored in tight spaces between shifts.

The frame is made from steel throughout, with no wood or plastic components. The black matte finish is a powder-coated layer applied in an electrostatic process and cured in an oven, giving a uniform, durable surface that does not chip or peel. Plastic glides on the legs are the only non-metal parts, chosen to protect floors from scuffs and indentations.

Controls are not applicable; the chair is a static piece of equipment. The 390 mm width and depth create a footprint that fits standard restaurant table spacing, while the 460 mm seat height matches most commercial dining tables. The 4.2 kg weight allows easy movement by staff, and the stackable design reduces storage space to a fraction of the floor area occupied when in use.

Cleaning is limited to wiping the steel surface with a damp cloth and mild detergent. The powder coating resists staining, so spills do not penetrate the finish. Plastic glides can be removed and replaced if worn, and the protective bumpers on the beams are also replaceable. No lubrication or adjustment is required.

The chair is available in the PARIS100 TOLIX model in black. It is a standalone seating unit and does not require additional parts or accessories for use.

Catalogue placement: Commercial seating – Stacking chairs – Steel construction.