LOTUS Electric Hob with Two Square 90 Plates PCQT-94ETX

An electric hob that transfers heat through two square cast-iron plates, each sized for professional catering pans. Cast iron holds and spreads the heat evenly across its surface, reducing hot spots and allowing consistent cooking results. The hob draws power from a three-phase 400 V supply, distributing the load across the circuit to support the high wattage without overloading a single phase. This configuration suits commercial kitchens where multiple high-power appliances run simultaneously without tripping breakers or requiring separate circuits for each device.

The operator places a pan on one of the square plates, selects a power level from seven settings using the water-resistant control knobs, and starts cooking. The knobs adjust the heat output in precise increments, enabling gentle simmering or rapid boiling as needed. Pan supports fitted to each plate prevent cookware from sliding during use, securing the pan in position even when the hob is moved or adjusted. Adjustable legs at the base level the unit on uneven floors, ensuring stability during operation.

The hob is constructed from 18/10 AISI 304 stainless steel, a grade chosen for its corrosion resistance and durability in wet kitchen environments. The worktop surface is 2 mm thick with rounded edges, finished in a Scotch-Brite satin texture that resists scratches and fingerprints. Chrome-plated details and a rear protective panel add to the unit's resistance to moisture and cleaning chemicals. The control knobs carry an IPX5 water-resistance rating, allowing them to withstand low-pressure water jets during cleaning without damage to the internal wiring.

Each plate delivers 4.0 kW of power, combining to a total load of 8.0 kW on the electrical supply. This rating indicates the hob's capacity to heat large volumes quickly, suitable for bulk cooking or high-demand service periods. The 400x900x280 mm footprint defines the space the hob occupies on a worktop or counter, while the 33 kg weight suggests the unit is designed for permanent installation rather than frequent relocation. The three-phase 400 V voltage requirement means the hob connects to a dedicated commercial circuit, not a standard domestic socket.

Cleaning involves removing the front control panel to access internal components, allowing thorough maintenance without dismantling the entire unit. The satin-finished stainless steel surface and rounded edges simplify wiping down after use, while the water-resistant controls permit safe cleaning with damp cloths or low-pressure rinsing. The hob is supplied with pan supports for each plate, ensuring safe and stable placement of cookware during operation.

The LOTUS PCQT-94ETX is categorised under professional electric hobs with square cast-iron plates, designed for commercial kitchens requiring high-power, durable cooking surfaces.