LOTUS Electric Range with Neutral Cabinet PCQ-94ET

An electric range built for continuous service in professional kitchens, combining solid cast-iron hobs with a neutral storage cabinet in a single compact unit. The hobs heat by conduction: each cast-iron plate transfers energy directly to pots and pans, eliminating hot spots and holding temperature steadily once set. This method gives immediate response when the control is turned up or down, and the steel-edged rims keep the heat contained so that adjacent burners can be used at different settings without interference.

The sequence begins by placing cookware on the hob and selecting one of seven power levels with the rotary control. A built-in temperature limiter prevents overheating, so the setting can be left unattended while the hob maintains the chosen output. When cooking is complete, the control is turned to zero and the hob cools quickly, ready for the next task. Below the hobs, the open-front cabinet provides visible, unobstructed storage for trays, utensils or small equipment, keeping them within reach without occupying additional worktop space.

The entire unit is fabricated from 18/10 AISI 304 stainless steel, finished in a Scotch-Brite satin that resists fingerprints and scratches. The 2 mm thick worktop has rounded edges for safety, while chrome-plated trim and a rear splashguard protect the surrounding area. Controls are water-resistant to IPX5, allowing thorough cleaning without risk to the electronics. A single end panel (TPA-9) is supplied to close one side when the range is installed at the end of a run.

Power is drawn from a 400 V two-phase neutral or 230 V three-phase supply at 50/60 Hz, making the unit compatible with standard commercial circuits. The 8 kW rating indicates the total load on the supply, which must be provisioned accordingly. At 57 kg, the range is light enough to be moved by two people, yet the adjustable feet ensure a stable, level base once in position. The footprint of 400 mm depth by 900 mm width fits into most kitchen layouts, leaving room for adjacent appliances or work surfaces.

Cleaning is straightforward: the front control panel lifts off to expose all internal components, allowing grease and debris to be wiped away without dismantling. The cast-iron hobs can be lifted out for deeper cleaning, while the stainless steel surfaces are wiped down with a damp cloth and mild detergent. The open cabinet requires only occasional dusting or wiping to maintain hygiene.

The PCQ-94ET is a single model with no variants; the supplied end panel is the only optional accessory. It is categorised as a range in the LOTUS professional catering catalogue, designed for integration into commercial kitchen setups.