More from this brand
Technical data
| Attributes | |
| ARTICLE | 08230451 |
| POWER | 7 kW (6.020 kcal/h) |
| SIZE L/W/H | 400x705x900 mm |
| VOLUME | 69 kg |
| Model | FTL-74G |
| NOTES | Cooking plate cm.36x51 |
Professional gas griddle with a smooth cooking surface and an open neutral cabinet, designed for intensive use in professional kitchens. The durable AISI 304 stainless steel construction ensures even heat distribution, a long service life, and easy daily maintenance.
A gas fry-top creates a large, even heat zone directly on a steel plate, transferring energy from the flame through the metal to the food without hot air in between. The smooth surface allows pans to slide easily and gives a consistent sear across the entire cooking area, while the open flame beneath responds instantly to changes in gas flow, letting the chef raise or lower the temperature in seconds.
The operator lights the pilot with the built-in piezo ignition, then sets the desired temperature between 50 °C and 300 °C using the waterproof control knob. Once the thermostat reaches the set point, it holds the heat steady by modulating the gas valve via a thermocouple. Food is placed directly on the plate or in pans, and excess fat drains into a large-capacity, removable grease tray beneath the front edge. After service, the front control panel lifts off to expose the gas manifold and burner assembly for cleaning.
The cooking plate is 2 mm thick FE510C steel with rounded edges, mounted on a frame of 18/10 AISI 304 stainless steel finished in a Scotch-Brite satin polish. Chrome-plated trim and a rear splash guard protect the surrounding surfaces, while an open cabinet below provides storage for utensils and small equipment. Adjustable legs level the unit on uneven floors, and a single end panel (TPA-9) is included for seamless installation against a wall or run of similar appliances.
A 7 kW gas load requires a dedicated commercial circuit and adequate ventilation to remove combustion fumes through the rear flue. The 400 mm depth and 705 mm width fit standard worktop runs, while the 900 mm height allows comfortable standing use. The 69 kg weight ensures stability during operation but calls for two people or a trolley when moving the unit.
The gas valve is supplied with a conversion kit for switching between different fuel types. Daily cleaning involves wiping the plate with a scraper and cloth, emptying the grease tray, and brushing out the burner ports. The waterproof control knob and sealed housing meet IPX5 standards, allowing hosing down without electrical risk.
The FTL-74G is listed in the LOTUS Professional range under gas fry-tops and griddle plates.