More from this brand
Technical data
| Attributes | |
| ARTICLE | 40343050 |
| POWER | 16.5 kW |
| SIZE L/W/H | 800/700/850 mm |
| VOLTAGE | Gas 14.190 kcal/h |
| VOLUME | 28 litri |
| WEIGHT | 84 kg |
Tank 70x38x24 cm.
Basket- 67x35x8 cm.
Sieve and lid for tank.
Drip tray with sieve.
A gas-powered fryer designed for confectionery work, where the oil must stay at a steady temperature to cook doughnuts, churros, fritters and other sweets without burning. The appliance burns gas to heat the oil in a wide, shallow tank; a thermostat cycles the burners on and off to hold the set point. Because the tank is broad and low, the oil surface is large enough to lower several pieces at once, yet the depth is still sufficient to submerge them fully. The result is even colour and texture across the batch, with no hot spots that would scorch the sugar or caramelise the outside before the inside is done.
The operator fills the tank with oil to the marked level, then sets the thermostat to the required temperature. Piezoelectric ignition lights the pilot and main burners; a thermocouple safety valve shuts the gas off if the flame goes out. Once the oil reaches the set point, the basket is lowered into the tank and the lid is closed to keep the heat in. A built-in filter under the basket catches crumbs and debris, preventing them from burning and tainting the next batch. When frying is complete, the basket is lifted out, drained over the tank, and the lid is replaced to maintain temperature for the next cycle.
The fryer is built from 1 mm thick CrNi 18/10 AISI 304 stainless steel, satin-polished for a smooth, easy-clean surface. Rounded edges and a rear splashback protect the worktop and walls from oil splashes. The worktop itself is 1 mm stainless steel, integrated into the frame. Chromed details include the basket handle, lid handle and control knobs. A removable front panel gives access to the burners, thermostat and safety valves for servicing.
Controls consist of a thermostat knob that sets the oil temperature, a Piezo ignition button, and a pilot light that shows when the burners are on. The gas supply is fitted with a thermocouple safety valve that cuts off the flow if the flame fails.
The 16.5 kW power rating indicates the maximum gas consumption when the burners are fully on. This load requires a dedicated gas line sized for the appliance. The 28 litre oil capacity allows the tank to hold enough oil to submerge the basket fully while leaving room for expansion. The 84 kg weight means the fryer is moved on a trolley or with two people; adjustable feet level it on uneven floors. The 800 mm width, 700 mm depth and 850 mm height give a footprint that fits on most professional worktops, with the rear splashback protecting the wall behind.
Cleaning involves draining the oil through the filter drain pan, then wiping the tank, basket and lid with a cloth and mild detergent. The filter basket is removed and rinsed under running water. The front panel is taken off to clean behind it and to inspect the burners and valves. The stainless steel surfaces are wiped down with a non-abrasive pad to maintain the satin finish.
The appliance is supplied with conversion jets for both LPG and Natural Gas, allowing it to be connected to either supply. Adjustable feet ensure the fryer sits level on the floor. An oil filter drain pan is included for safe oil disposal.
This model is listed in the catalogue under Professional Confectionery Equipment, Gas Fryers.