SAVIOLI ME30MB-T Meat Mincer – 30 kg Bench Model

A meat mincer of this type draws whole cuts through a rotating spiral auger that presses them against a perforated cutting plate. The auger's helical flights shear the meat into strands, forcing it through the plate's holes to create a consistent texture without pre-chopping. The process relies on steady torque rather than high speed, so the motor runs at a controlled pace that keeps the meat cool and prevents smearing.

To operate the ME30MB-T, the operator tips the stainless-steel tank back 90° and loads up to 30 kg of meat. The tank is then returned to the vertical position, the removable paddle is inserted, and the cover is closed, engaging the emergency microswitch. The low-voltage electric panel is set to start, and the auger begins turning. Meat is fed continuously through the hopper, emerging minced at the front outlet. When the batch is complete, the tank can be tipped again for quick emptying of any remaining scraps.

The entire structure is stainless steel, designed for bench mounting. A single paddle works the meat down the auger, and the cover microswitch cuts power instantly if opened during operation. The electric panel runs on 24 V for operator safety, while the motor itself requires a 400 V three-phase supply.

The 0.75 kW motor rating indicates the electrical load the unit places on the kitchen circuit. The 400 V three-phase connection is typical of professional catering equipment, allowing the mincer to run without overloading a single-phase supply. The 30 kg capacity refers to the weight of meat that can be loaded at once, while the 40 L figure denotes the tank's internal volume. The 720 × 360 × 570 mm footprint shows the space the mincer occupies on the worktop, and the 40 kg weight means it can be moved by two people or a small trolley.

Cleaning involves removing the paddle and tipping the tank to rinse out residues. The cutting plate and auger are detached for thorough washing, and the stainless-steel surfaces are wiped down with food-safe sanitiser. The low-voltage panel is kept dry, and the emergency microswitch is checked regularly to ensure it trips when the cover is opened.

The ME30MB-T is a bench model with a single paddle, supplied as standard without additional attachments or variants.